Publikationen bei Konferenzen

• J. Gisler, C. Hirt, V. Holzwarth, A. Kunz, Designing Virtual Training Environments: Does Immersion increase Task Performance?, Cyberworlds 2020, 2020, Caen, Frankreich, [BibTeX][Abstract]
  
  
• A. Nguyen Thi, Y. Rothacher, B. Lenggenhager, P. Brugger, A. Kunz, Effect of Sense of Embodiment on Curvature Redirected Walking Thresholds, ACM Symposium on Applied Perception 2020, 2020, online, [BibTeX][Abstract]
  
  
• N. Dhingra, R. Koutny, S. Günther, K. Miesenberger, M. Mühlhäuser, A. Kunz, Pointing Gesture Based User Interaction of Tool Supported Brainstorming Meetings, 17th International Conference on Computers Helping People with Special Needs, 2020, online, [BibTeX][Abstract]
  
  
• R. Koutny, S. Günther, N. Dhingra, A. Kunz, K. Miesenberger, M. Mühlhäuser, Accessible Multimodal Tool Support for Brainstorming Meetings, 17th International Conference on Computers Helping People with Special Needs, 2020, online, [BibTeX][Abstract]
  
  
• A. Kunz, K. Miesenberger, M. Mühlhäuser, Accessibility of Non-Verbal Communication: Making Spatial Information Accessible to People with Disabilities - Introduction to the Special Thematic Session, 17th International Conference on Computers Helping People with Special Needs, 2020, online, [BibTeX][Abstract]
  
  
• N. Dhingra, E. Valli, A. Kunz, Recognition and Localisation of Pointing Gestures using a RGB-D Camera, 22nd International Conference on Human-Computer Interaction, 2020, Kopenhagen, Dänemark, Seiten to be published, [BibTeX][Abstract]
  
  
• N. Dhingra, C. Hirt, M. Angst, A. Kunz, Eye Gaze Tracking for Detecting Non-verbal Communication in Meeting Environments, 15th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications, 2020, Valetta, Malta, Seiten HUCAPP20-RP-47, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, M. Spahni, Y. Kompis, D. Jetter, A. Kunz, Alles rund um die Maschine - Begehbare virtuelle Schulung an Werkzeugmaschinen, VAR2 - Realität erweitern, 2019, Chemnitz, Deutschland, ISBN 978-3-00-064420-7, Seiten 43--58, [BibTeX][Abstract][Paper]
  
  
• K. Le,, P. Wozniak,, A. Alavi, M. Fjeld, A. Kunz, DigiMetaplan: Supporting Facilitated Brainstorming for Distributed Business Teams, International Conference on Mobile and Ubiquitous Multimedia, 2019, Pisa, Italien, ISBN 978-1-4503-7624-2, DOI 10.1145/3365610.3365637, Seiten Paper 36, [BibTeX][Abstract][Paper]
  
  
• N. Dhingra, A. Kunz, Res3ATN - Deep 3D Residual Attention Network for Hand Gesture Recognition in Videos, International Conference on 3D Vision 2019, 2019, Quebec, Kanada, ISSN 2475-7888, DOI 10.1109/3DV.2019.00061, Seiten 491--501, [BibTeX][Abstract][Paper]
  
  
• V. Holzwarth, J. Schneider, A. Kunz, J. vomBrocke, Approaching data driven services in the built environment, Smart Services Summit 2019, 2019, Zürich, Schweiz, ISBN 978-3-033-07563-4, Seiten 18--21, [BibTeX][Abstract][Paper]
  
  
• V. Holzwarth, J. Schneider, A. Kunz, J. vomBrocke, Data driven value creation in AEC along the building lifecycle, CISBAT, 2019, Lausanne, Schweiz, DOI 10.1088/1742-6596/1343/1/012046, Band J. Phys.: Conf. Ser. 1343 012046, Seiten 1343 (2019) 012046, [BibTeX][Abstract][Paper]
  
  
• K. Le, I. Avellino, C. Fleury, M. Fjeld, A. Kunz, GazeLens: Guiding Attention to Improve Gaze Interpretation in Hub-Satellite Collaboration, 17th IFIP TC.13 International Conference on Human-Computer Interaction, 2019, Paphos, Zypern, ISBN 978-3-030-29383-3, DOI 10.1007/978-3-030-29384-0_18, Seiten 282--303, [BibTeX][Abstract][Paper]
  
  
• J. Kubenke, A. Kunz, Potentials of IT-supported Assistive Systems: Comparison of two User Studies in the Manufacturing Industry, 9th IFAC Triannual Conference on Manufacturing Modeling, Management and Control, 2019, Berlin, Deutschland, ISSN 2405-8963, DOI 10.1016/j.ifacol.2019.11.474, Seiten 1866--1871, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, V. Holzwarth, J. Gisler, J. Schneider, A. Kunz, Virtual Learning Environment for an Industrial Assembly Task, International Conference on Consumer Electronics 2019, 2019, Berlin, Deutschland, ISBN 978-1-7281-2745-3, Seiten 1--6, [BibTeX][Abstract][Paper]
  
  
• M. Dobler, M. Ballandies, V. Holzwarth, On the Extension of Digital Ecosystems for SCM and Customs with Distributed Ledger Technologies: Requirements Anlysis, Innovation Assessment, and Prototype Design for the Lake Constance Region, IEEE International Conference on Engineering, Technology and Innovation, 2019, Sophia Antipolis, Frankreich, DOI 10.1109/ICE.2019.8792646, [BibTeX][Abstract]
  
  
• S. Günther, R. Koutny, N. Dhingra, M. Funk, C. Hirt, K. Miesenberger, M. Mühlhäuser, A. Kunz, MAPVI: Meeting Accessibility for Persons with Visual Impairments, PErvasive Technologies Related to Assistive Environments, 2019, Rhodes, Griechenland, ISBN 978-1-4503-6232-0, DOI https://doi.org/10.1145/3316782.3322747, Seiten 343--352, [BibTeX][Abstract][Paper][Slides]
  
  
• C. Hirt, M. Zank, A. Kunz, Short-term Path Prediction for Virtual Open Spaces, IEEE Virtual Reality 2019, 2019, Osaka, Japan, ISBN 978-1-7281-1377-7, ISSN 2642-5254, DOI 10.1109/VR.2019.8797709, Seiten 978--979, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, M. Zank, A. Kunz, PReWAP: Predictive Redirected Walking using Artificial Potential Fields, IEEE Virtual Reality 2019, 2019, Osaka, Japan, ISBN 978-1-7281-1378-4, ISSN 2642-5254, DOI 10.1109/VR.2019.8798118, Seiten 976--977, [BibTeX][Abstract][Paper]
  
  
• A. Nguyen Thi, A. Kunz, Discrete Scene Rotation During Blinks and Its Effect on Redirected Walking Algorithms, 24th ACM Symposium on Virtual Reality Software and Technology, 2018, Tokyo, Japan, ISBN 978-1-4503-6086-9, DOI 10.1145/3281505.3281515, Seiten No. 29, [BibTeX][Abstract][Paper]
  
  
• J. Kubenke, P. Roh, A. Kunz, Assessing the Efficiency of Information Retrieval from the Digital Shadow at the Shop Floor using IT Assistive Systems, Mechatronics 2018, 2018, Glasgow, Vereinigtes Königreich, ISBN 978-1-909522-37-4, Seiten 202--209, [BibTeX][Abstract][Paper]
  
  
• A. Nguyen Thi, Y. Rothacher, B. Lenggenhager, P. Brugger, A. Kunz, Individual differences and impact of gender on curvature redirection thresholds, 2018 ACM Symposium on Applied Perception, 2018, Vancouver, Kanada, ISBN 978-1-4503-5894-1, DOI 10.1145/3225153.3225155, Seiten Paper 5, [BibTeX][Abstract][Paper]
  
  
• L. Clack, C. Hirt, M. Wenger, D. Saleschus, A. Kunz, H. Sax, VIRTUE – A Virtual Reality Trainer for Hand Hygiene, International Workshop on Immersive Technologies and Serious Gaming for Health Professions Education, 2018, Zakynthos, Griechenland, ISBN 978-1-5386-8161-9, ISSN 978-1-5386-8162-6, DOI 10.1109/IISA.2018.8633588, Seiten 1--2, [BibTeX][Abstract][Paper]
  
  
• J. Kubenke, A. Kunz, Efficient Motion Analysis of IT Support for Information Retrieval at Manual Workplaces, 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 2018, Neapel, Italien, ISSN 2212-8271, DOI 10.1016/j.procir.2019.02.049, Band 79C, Seiten 210--214, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, K. Miesenberger, L. Zeng, G. Weber, Virtual Navigation Environment for Blind and Low Vision People, 16th Biennial International Conference on Computers Helping People with Special Needs, 2018, Linz, Österreich, DOI 10.1007/978-3-319-94274-2_17, Band LNCS 10897, Nr. 2, Seiten 114--122, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, M. Zank, A. Kunz, Geometry Extraction for Ad Hoc Redirected Walking using a SLAM Device, 5th International Conference on Augmented Reality, Virtual Reality and Computer Graphics, 2018, Lecce, Italien, DOI 10.1007/978-3-319-95270-3_3, Band LNCS, Nr. 10850, Seiten 35--53, [BibTeX][Abstract][Paper]
  
  
• A. Nguyen Thi, M. Inhelder, A. Kunz, Discrete Rotation during Eye-Blink, 5th International Conference on Augmented Reality, Virtual Reality and Computer Graphics, 2018, Lecce, Italien, DOI 10.1007/978-3-319-95270-3_13, Band LNCS, Nr. 10850, Seiten 183--189, [BibTeX][Abstract][Paper][Slides]
  
  
• P. Roh, A. Kunz, T. Netland, Data-driven detection of moving bottlenecks in multi-variant production lines, 16th IFAC Symposium on Information Control Problems in Manufacturing, 2018, Bergamo, Italien, DOI 10.1016/j.ifacol.2018.08.251, Band 51, Nr. 11, Seiten 158--163, [BibTeX][Abstract][Paper]
  
  
• Y. Rothacher, A. Nguyen Thi, B. Lenggenhager, A. Kunz, P. Brugger, Visual Capture of Gait in Redirected Walking, Measuring Behavior, 2018, Manchester, Vereinigtes Königreich, ISBN 978-1-910029-39-8, DOI 10.3929/ethz-b-000269155, Seiten 427--428, [BibTeX][Abstract][Paper]
  
  
• J. Kubenke, A. Kunz, Efficiency Measurement of IT Support for Information Retrieval at Manual Workplaces, IEEE International Conference on Industrial Cyber-Physical Systems, 2018, St. Petersburg, Russland, ISBN 978-1-5386-6530-5/18, DOI 10.1109/ICPHYS.2018.8390768, Seiten 567--572, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, M. Zank, A. Kunz, Preliminary Environment Mapping for Redirected Walking, 25th IEEE Conference on Virtual Reality and 3D User Interfaces, 2018, Reutlingen, Deutschland, DOI 10.1109/VR.2018.8446262, Seiten 573--574, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Nguyen Thi, Y. Rothacher, A. Kunz, P. Brugger, B. Lenggenhager, Effect of Environment Size on Curvature Redirected Walking Thresholds, 25th IEEE Conference on Virtual Reality and 3D User Interfaces, 2018, Reutlingen, Deutschland, DOI 10.1109/VR.2018.8446225, Seiten 645--646, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Kunz, K. Wegener, Der Einsatz der virtuellen Realität in der Produktionsplanung, 4. Fachkonferenz zu VR/AR-Technologien in Anwendung und Forschung an der Professur Werkzeugmaschinen und Umformtechnik, 2017, Chemnitz, Deutschland, ISBN 978-3-00-058419-0, DOI 10.3929/ethz-b-000218665, Seiten 27--36, [BibTeX][Abstract][Paper]
  
  
• A. Nguyen Thi, A. Kunz, Y. Rothacher, P. Brugger, B. Lenggenhager, Spontaneous Alternation Behavior in Humans, ACM Symposium on Virtual Reality Software and Technology, 2017, Göteborg, Schweden, ISBN 978-1-4503-5548-3, DOI 10.1145/3139131.3139168, Seiten 21:1--21.4, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, M. Zank, A. Kunz, Real-time Wall Outline Extraction for Redirected Walking, ACM Symposium on Virtual Reality Software and Technology, 2017, Göteborg, Schweden, ISBN 978-1-4503-5548-3, DOI 10.1145/3139131.3143416, Seiten 72:1--72:2, [BibTeX][Abstract][Paper][Slides]
  
  
• K. Le, M. Fjeld, A. Alavi, A. Kunz, Immersive Environment for Distributed Creative Collaboration, ACM Symposium on Virtual Reality Software and Technology, 2017, Göteborg, Schweden, ISBN 978-1-4503-5548-3, DOI 10.1145/3139131.3139163, Seiten 16:1--16:4, [BibTeX][Abstract][Paper][Video]
  
  
• A. Nguyen Thi, F. Cervellati, A. Kunz, Gain Compensation in Redirected Walking, ACM Symposium on Virtual Reality Software and Technology, 2017, Göteborg, Schweden, ISBN 978-1-4503-5548-3, DOI 10.1145/3139131.3139167, Seiten 20:1--20:4, [BibTeX][Abstract][Paper]
  
  
• M. Mussgnug, A. Sadowska, R. Moryson, M. Meboldt, Target based analysis –a model to analyse tests based on mobile eye tracking recordings, 21st International Conference on Engineering Design, Section: Human Behaviour in Design, 2017, Vancouver, Kanada, ISBN 978-1-904670-96-4, Seiten 59--68, [BibTeX][Abstract]
  
  
• M. Engeler, A. Elmiger, A. Kunz, D. Zogg, K. Wegener, Online Condition Monitoring Tool for Automated Machinery, 16th CIRP Conference on Modeling of Machining Operations, 2017, Cluny, Frankreich, DOI 10.1016/j.procir.2017.04.003, Band 58, Seiten 323--328, [BibTeX][Abstract][Paper]
  
  
• M. Zank, A. Kunz, Optimized Graph Extraction and Locomotion Prediction for Redirected Walking, IEEE Symposium on 3D User Interfaces, 2017, Los Angeles, USA, ISBN 978-1-5090-6715-2, DOI 10.1109/3DUI.2017.7893328, Seiten 120--129, [BibTeX][Abstract][Paper]
  
  
• M. Zank, C. Yao, A. Kunz, Multi-phase Wall Warner System for Real Walking in Virtual Environments, IEEE Symposium on 3D User Interfaces, 2017, Los Angeles, USA, ISBN 978-1-5090-6715-2, DOI 10.1109/3DUI.2017.7893352, Seiten 223--224, [BibTeX][Abstract][Paper][Slides]
  
  
• T. Bänziger, A. Kunz, K. Wegener, A Library of Skills and Behaviors for Smart Mobile Assistant Robots in Automotive Assembly Lines, The 2017 Conference on Human-Robot Interaction, 2017, Wien, Österreich, ISBN 978-1-4503-4885-0, DOI 10.1145/3029798.3038415, Seiten 77--78, [BibTeX][Abstract][Paper][Slides]
  
  
• F. Soffel, M. Zank, A. Kunz, Postural Stability Analysis In Virtual Reality Using the HTC Vive, The ACM Symposium on Virtual Reality Software and Technology 2016, 2016, München, Deutschland, ISBN 978-1-4503-4491-3, DOI 10.1145/2993369.2996341, Seiten 351--352, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, L. Brogli, A. Alavi, Interference Measurement of Kinect for Xbox One, The ACM Symposium on Virtual Reality Software and Technology 2016, 2016, München, Deutschland, ISBN 978-1-4503-4491-3, DOI 10.1145/2993369.2996329, Seiten 345--346, [BibTeX][Abstract][Paper]
  
  
• A. Nguyen Thi, Y. Rothacher, P. Brugger, B. Lenggenhager, A. Kunz, Estimation of individual redirected walking thresholds using standard perception tests, The ACM Symposium on Virtual Reality Software and Technology 2016, 2016, München, Deutschland, ISBN 978-1-4503-4491-3, DOI 10.1145/2993369.2996304, Seiten 329--330, [BibTeX][Abstract][Paper]
  
  
• K. Wegener, A. Kunz, L. Bochmann, T. Bänziger, Industrie 4.0 für den Maschinen- und Anlagenbau, 3. Wiener Produktionstechnik Kongress, 2016, Wien, Österreich, ISBN 978-3-7003-1976-4, DOI 10.3929/ethz-a-010722924, Band 3, Seiten 29--52, [BibTeX][Abstract][Paper]
  
  
• J. Teiwes, T. Bänziger, A. Kunz, K. Wegener, Identifying the Potential of Human-Robot Collaboration in Automotive Assembly Lines using a Standardised Work Description, 22nd International Conference on Automation and Computing, 2016, Colchester, Vereinigtes Königreich, ISBN 978-1-86218-132-8, DOI 10.1109/IConAC.2016.7604898, Seiten 1--6, [BibTeX][Abstract][Paper]
  
  
• L. Bochmann, T. Bänziger, A. Kunz, K. Wegener, Human-Robot Collaboration in Decentralized Manufacturing Systems: An Approach for Simulation-based Evaluation of Future Intelligent Production, 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 2016, Neapel, Italien, DOI 10.1016/j.procir.2016.06.021, Band 62, Seiten 624--629, [BibTeX][Abstract][Paper]
  
  
• S. Pölzer, A. Kunz, A. Alavi, K. Miesenberger, An Accessible Environment to Integrate Blind Participants into Brainstorming Sessions, 15th International Conference on Computers Helping People with Special Needs, 2016, Linz, Österreich, ISBN 978-3-319-41266-5, ISSN 0302-9743, DOI 10.1007/978-3-319-41267-2_84, Band Lecture Notes in Computer Sciences, Nr. 9759, Seiten 587--593, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, M. Zank, M. Fjeld, T. Nescher, Real walking in virtual environments for factory planning and evaluation, 6th CIRP Conference on Assembly Technologies and Systems, 2016, Göteborg, Schweden, DOI 10.1016/j.procir.2016.02.086, Seiten 257--262, [BibTeX][Abstract][Paper]
  
  
• T. Nescher, M. Zank, A. Kunz, Simultaneous Mapping and Redirected Walking for ad hoc Free Walking in Virtual Environments, IEEE Virtual Reality, 2016, Greenville, USA, ISBN 978-1-5090-0836-0, ISSN 2375-5334, DOI 10.1109/VR.2016.7504742, Seiten 239--240, [BibTeX][Abstract][Paper]
  
  
• M. Zank, A. Kunz, Eye Tracking for Locomotion Prediction in Redirected Walking, IEEE Symposium on 3D User Interfaces, 2016, Greenville, USA, ISBN 978-1-5090-0842-1, DOI 10.1109/3DUI.2016.7460030, Seiten 49--58, [BibTeX][Abstract][Paper]
  
  
• M. Zank, L. Kern, A. Kunz, Improvements on a Novel Hybrid Tracking System, Proceedings of the 7th Augmented Human International Conference 2016, 2016, Genf, Schweiz, ISBN 978-1-4503-3680-2, DOI 10.1145/2875194.2875196, Seiten Article No. 22, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Kunz, M. Zank, T. Nescher, K. Wegener, Virtual reality based time and motion study with support for real walking, 49th CIRP Conference on Manufacturing Systems, 2016, Stuttgart, Deutschland, DOI 10.1016/j.procir.2016.11.053, Band 57, Seiten 303--308, [BibTeX][Abstract][Paper]
  
  
• M. Engeler, D. Treyer, D. Zogg, K. Wegener, A. Kunz, Condition-based Maintenance: Model vs. Statistics A Performance Comparison, 49th CIRP Conference on Manufacturing Systems, 2016, Stuttgart, Deutschland, DOI 10.1016/j.procir.2016.11.044, Band 57, Seiten 253--258, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, K. Wegener, Die Mensch-Maschine-Schnittstelle als Schlüsselelement für VR/AR-Anwendungen, 3. Fachkonferenz zu VR/AR-Technologien in Anwendung und Forschung an der Professur für Werkzeugmaschinen und Umformtechnik, 2015, Chemnitz, Deutschland, DOI 10.3929/ethz-a-010561390, Seiten 17--26, [BibTeX][Abstract][Paper]
  
  
• M. Zank, A. Kunz, Using Locomotion Models for Estimating Walking Targets in Immersive Virtual Environments, International Conference on Cyberworlds, 2015, Gotland, Schweden, ISBN 978-1-4673-9403-1/15, DOI 10.1109/CW.2015.20, Seiten 229--236, [BibTeX][Abstract][Paper]
  
  
• D. Kono, P. Roh, A. Matsubara, Investigation on position dependency of tool-workpiece compliance, Proceedings of 38th International MATADOR, 2015, Yunlin, Taiwan, Seiten 293--297, [BibTeX][Abstract]
  
  
• A. Yantaç, D. Çorlu, M. Fjeld, A. Kunz, Exploring Diminished Reality (DR) Spaces to Augment the Attention of Individuals with Autism, International Workshop on Diminished Reality as Challenging Issue in Mixed and Augmented Reality, 2015, Fukuoka, Japan, ISBN 978-1-4673-8471-1/15, DOI 10.1109/ISMARW.2015.21, Seiten 68--73, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Alavi, A. Kunz, In-air Eyes-free Text Entry: A work in progress, Proceedings of the 4th IUI Workshop on Interacting with Smart Objects 2015, 2015, Atlanta, USA, DOI 10.3929/ethz-a-010412935, Seiten 24--27, [BibTeX][Abstract][Paper][Slides]
  
  
• M. Zank, T. Nescher, A. Kunz, Tracking Human Locomotion by Relative Positional Feet Tracking, IEEE Virtual Reality 2015, 2015, Arles, Frankreich, ISSN 978-1-4799-1727-3, DOI 10.1109/VR.2015.7223423, Seiten 317--318, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Kunz, D. Schnelle-Walka, A. Alavi, S. Pölzer, M. Mühlhäuser, K. Miesenberger, Making Tabletop Interaction Accessible for Blind Users, Interactive Tabletops and Surfaces, 2014, Dresden, Deutschland, ISBN 978-1-4503-2587-5, DOI 10.1145/2669485.2669541, Seiten 327--332, [BibTeX][Abstract][Paper]
  
  
• M. Zank, A. Kunz, Cost Based Estimation of Intended Locomotion Targets Using Human Locomotion Models, 20th ACM Symposium on Virtual Reality Software and Technology, 2014, Edinburgh, Vereinigtes Königreich, ISBN 978-1-4503-3253-8, DOI 10.1145/2671015.2671126, Seiten 217--218, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, K. Miesenberger, Accessibility of Non-verbal Communication Introduction to the Special Thematic Session, 14th International Conference on Computers Helping People with Special Needs, 2014, Paris, Frankreich, ISBN 978-3-319-08596-8, DOI 10.1007/978-3-319-08596-8, Band LNCS, Nr. 8547, Seiten 205--208, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, K. Miesenberger, M. Mühlhäuser, A. Alavi, S. Pölzer, D. Pöll, P. Heumader, D. Schnelle-Walka, Accessibility of Brainstorming Sessions for Blind People, 14th International Conference on Computers Helping People with Special Needs, 2014, Paris, Frankreich, ISBN 978-3-319-08596-8, DOI 10.1007/978-3-319-08596-8, Band LNCS, Nr. 8547, Seiten 237--244, [BibTeX][Abstract][Paper][Video]
  
  
• D. Schnelle-Walka, A. Alavi, P. Ostie, M. Mühlhäuser, A. Kunz, A Mind Map for Brainstorming Sessions with Blind and Sighted Persons, 14th International Conference on Computers Helping People with Special Needs, 2014, Paris, Frankreich, ISBN 978-3-319-08596-8, DOI 10.1007/978-3-319-08596-8, Band LNCS, Nr. 8547, Seiten 214--219, [BibTeX][Abstract][Paper][Video]
  
  
• T. Nescher, Y. Huang, A. Kunz, Planning Redirection Techniques for Optimal Free Walking Experience Using Model Predictive Control, IEEE 9th Symposium on 3D User Interfaces, 2014, Minneapolis, USA, DOI 10.1109/3DUI.2014.6798851, Seiten 111--118, [BibTeX][Abstract][Paper][Video]
  
  
• A. Kunz, A. Alavi, P. Sinn, Integrating Pointing Gesture Detection for enhancing Brainstorming Meetings using Kinect and PixelSense, 8th International Conference on Digital Enterprise Technology, 2014, Stuttgart, Deutschland, DOI 10.1016/j.procir.2014.10.031, Seiten 205--212, [BibTeX][Abstract][Paper]
  
  
• M. Zank, T. Nescher, A. Kunz, Robust Prediction of Auditory Step Feedback for Forward Walking, 19th ACM Symposium on Virtual Reality Software and Technology, 2013, Singapur, Singapur, ISBN 978-1-4503-2379-6, DOI 10.1145/2503713.2503735, Seiten 119--122, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, A. Alavi, J. Landgren, A. Yantaç, P. Wozniak, Z. Sárosi, M. Fjeld, Tangible Tabletops for Emergency Response: An Exploratory Study, International Conference on Multimedia, Interaction, Design and Innovation, 2013, Warschau, Polen, ISBN 978-1-4503-2303-1, DOI 10.1145/2500342.2500352, Seiten 1--8, [BibTeX][Abstract][Paper]
  
  
• G. Heinecke, S. Lamparter, R. Lepratti, A. Kunz, Advanced Supply Chain Information for Rule-Based Sequence Adaptions on a Mixed-Model Assembly Line with Unreliable Just-In-Sequence Deliveries, IFAC Conference on Manufacturing Modelling, Management, and Control 2013, 2013, St. Petersburg, Russland, DOI 10.3182/20130619-3-RU-3018.00095, Band 7, Seiten 1902--1907, [BibTeX][Abstract][Paper]
  
  
• S. Davud, B. Migge, G. Roger, K. Yeongmi, Prototype Of A VR Upper-limb Rehabilitation System Enhanced With Motion-based Tactile Feedback, IEEE World Haptics Conference 2013, 2013, Daejeon, Republik Korea, ISBN 978-1-4799-0087-9, DOI 10.1109/WHC.2013.6548450, Seiten 449--454, [BibTeX][Abstract]
  
  
• S. Chen, M. Chen, A. Kunz, A. Yantaç, M. Bergmark, A. Sundin, M. Fjeld, SEMarbeta: Mobile Sketch-Gesture-Video Remote Support for Car Drivers, 4th Augmented Human International Conference, 2013, Stuttgart, Deutschland, ISBN 978-1-4503-1904-1, DOI 10.1145/2459236.2459249, Seiten 69 -- 76, [BibTeX][Abstract][Paper][Slides][Video]
  
  
• A. Kunz, K. Wegener, Towards natural user interfaces in VR/AR for Design and Manufacturing, 2. Fachkonferenz zu VR/AR-Technologien an der Professur für Werkzeugmaschinen und Umformtechnik der TU Chemnitz, 2013, Chemnitz, Deutschland, ISBN 978-3-942267-66-3, Seiten 23--34, [BibTeX][Abstract][Paper]
  
  
• A. Almeida, D. Politze, A. Caldas, A. Azevedo, Linking Strategic Goals with Operational Performance: An Integrated Approach, The IEEE International Conference on Industrial Engineering and Engineering Management, 2012, Hong Kong, [BibTeX][Abstract]
  
  
• O. Schlatter, B. Migge, A. Kunz, User-aware Content Orientation on Interactive Tabletop Surfaces, 2012 International Conference on Cyberworlds, 2012, Darmstadt, Deutschland, ISBN 978-0-7695-4814-2/12, DOI 10.1109/CW.2012.43, Seiten 246--250, [BibTeX][Abstract][Paper][Video]
  
  
• B. Migge, A. Kunz, Interaction Prediction for Content Synchronization of Net-based Shared Workspaces, 2012 International Conference on Cyberworlds, 2012, Darmstadt, Deutschland, ISBN 978-0-7695-4814-2/12, DOI 10.1109/CW.2012.42, Seiten 241--245, [BibTeX][Abstract][Paper]
  
  
• T. Nescher, A. Kunz, Analysis of Short Term Path Prediction of Human Locomotion for Augmented and Virtual Reality Applications, 2012 International Conference on Cyberworlds, 2012, Darmstadt, Deutschland, ISBN 978-0-7695-4814-2/12, DOI 10.1109/CW.2012.10, Seiten 15--22, [BibTeX][Abstract][Paper]
  
  
• J. Köber, G. Heinecke, Segmentation and Evaluation of the Order-to-Delivery Process of Agricultural Machinery, 4th Production and Operations Management World Conference, 2012, Amsterdam, Niederlande, ISBN 978-9-4916-2100-0, [BibTeX][Abstract][Paper]
  
  
• G. Heinecke, B. Migge, A. Kunz, S. Lamparter, R. Lepratti, Measuring the performance-related effect of supply chain events on manufacturing operations, P&OM World Conference 2012, 2012, Amsterdam, Niederlande, ISBN 978-9-4916-2100-0, DOI 10.3929/ethz-a-007349852, [BibTeX][Abstract][Paper]
  
  
• J. Köber, G. Heinecke, Hybrid Production Strategy Between Make-to-Order and Make-to-Stock – A Case Study at a Manufacturer of Agricultural Machinery with Volatile and Seasonal Demand, 45th CIRP Conference on Manufacturing Systems, 2012, Athen, Griechenland, ISSN 2212-8271, DOI 10.1016/j.procir.2012.07.078, Band 3, Seiten 453-458, [BibTeX][Abstract][Paper]
  
  
• A. Steinemann, J. Taiber, G. Fadel, K. Wegener, A. Kunz, Adapting Discrete-Event Simulation Tools to Support Tactical Forecasting in the Automotive Industry, Ninth International Symposium on Tools and Methods of Competitive Engineering, 2012, Karlsruhe, Deutschland, ISBN 978-90-5155-082-5, Seiten 319--332, [BibTeX][Abstract][Paper]
  
  
• A. Steinemann, S. Wampfler, T. Kennel, A. Kunz, Definition and Analysis of a Lean Communication Theory, Ninth International Symposium on Tools and Methods of Competitive Engineering, 2012, Karlsruhe, Deutschland, ISBN 978-90-5155-082-5, DOI 10.3929/ethz-a-007250053, Seiten 153--162, [BibTeX][Abstract][Paper]
  
  
• A. Alavi, B. Clocher, A. Smith, A. Kunz, M. Fjeld, Multi-State Device Tracking for Tangible Tabletops, SIGRAD Swedish Chapter of Eurographics, 2011, Stockholm, Schweden, ISBN 1650-3686, DOI 10.3929/ethz-a-006708514, Seiten 100--104, [BibTeX][Abstract][Paper]
  
  
• A. Alavi, A. Kunz, M. Sugimoto, M. Fjeld, Dual Mode IR Position and State Transfer for Tangible Tabletops, Interactive Tabletops and Surfaces 2011 Conference, 2011, Kobe, Japan, ISBN 978-1-4503-0871-7, DOI 10.1145/2076354.2076414, Seiten 278--279, [BibTeX][Abstract][Paper][Slides]
  
  
• G. Heinecke, S. Lamparter, A. Kunz, K. Wegener, R. Lepratti, Process Transparency: Effects of a Structured Read Point Selection, IFPR 21st International Conference on Production Research, 2011, Stuttgart, Deutschland, ISBN 978-3-8396-0293-5, DOI 10.3929/ethz-a-006612736, [BibTeX][Abstract][Paper]
  
  
• B. Migge, A. Kunz, T. Schmidt, Interaction Error Based Viewpoint Estimation for Continuous Parallax Correction on Interactive Screens, IADIS International Conference: ICT, Society and Human Beings 2011, 2011, Rome, Italien, ISBN 978-972-8939-52-6, DOI 10.3929/ethz-a-006562196, Seiten 93--104, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Steinemann, S. Tschudi, A. Kunz, Full Body Haptic Display for Low-Cost Racing Car Driving Simulators, IEEE Virtual Reality 2011, 2011, Singapur, Singapur, ISBN 978-1-4577-0036-1, ISSN 1087-8270, DOI 10.1109/VR.2011.5759490, Seiten 245--246, [BibTeX][Abstract][Paper]
  
  
• A. Steinemann, Y. Kellenberger, P. Peikert, A. Kunz, SAMSON: Simulation Supported Traffic Training Environment, The First International Symposium on Virtual Reality Innovations, 2011, Singapur, Singapur, ISBN 978-1-4577-0053-8, DOI 10.1109/ISVRI.2011.5759661, Seiten 325--326, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, S. Dehlin, T. Piazza, M. Fjeld, T. Olofsson, Collaborative Whiteboard: Towards Remote CollaBoration and Interaction in Construction Design, 27th International Conference on Applications of IT in the ABC Industry & Accelerating BIM Research Workshop, 2010, Kairo, Ägypten, DOI 10.3929/ethz-a-006219046, Seiten 132--140, [BibTeX][Abstract][Paper]
  
  
• Z. Sárosi, W. Knapp, A. Kunz, K. Wegener, Evaluation of reflectivity of metal parts by a thermo-camera, Infrared Camera Applications Conference 2010, 2010, Las Vegas, USA, Seiten 475--486, [BibTeX][Abstract][Paper][Slides]
  
  
• Z. Sárosi, W. Knapp, A. Kunz, K. Wegener, Detection of surface defects on sheet metal parts by using one-shot deflectometry in the infrared range, Infrared Camera Applications Conference 2010, 2010, Las Vegas, USA, Seiten 243--254, [BibTeX][Abstract][Paper]
  
  
• M. Küchler, A. Kunz, CollaBoard: A Remote Collaboration Groupware Device Featuring an Embodiment-enriched Shared Workspace, ACM 2010 International Conference on Supporting Group Work, 2010, Sanibel / Florida, USA, Seiten 211--214, [BibTeX][Abstract][Paper][Video]
  
  
• B. Migge, A. Kunz, User Model for Predictive Calibration Control on Interactive Screens, 2010 International Conference on Cyberworlds - Cyberworlds 2010, 2010, Singapore, Singapur, DOI 10.1109/CW.2010.18, Seiten 32--37, [BibTeX][Abstract][Paper]
  
  
• D. Politze, J. Bathelt, K. Wegener, Function Oriented Product Descriptions in Product Development and Factory Planning, International Conference on Systems Engineering and Engineering Management on the World Congress on Engineering and Computer Science 2010, 2010, San Francisco, USA, ISBN 978-988-17012-0-6, Seiten 1168--1172, [BibTeX][Abstract]
  
  
• A. Kunz, T. Nescher, M. Küchler, CollaBoard: A Novel Interactive Electronic Whiteboard for Remote Collaboration with People on Content, 2010 International Conference on Cyberworlds - Cyberworldds 2010, 2010, Singapur, Singapur, DOI 10.1109/CW.2010.17, Seiten 430--437, [BibTeX][Abstract][Paper]
  
  
• D. Politze, J. Bathelt, N. Jufer, A. Kunz, A Survey on Stakeholders and Requirements for a new Factory Planning Approach, NordDesign 2010, 2010, Göteborg, Schweden, Seiten 447--454, [BibTeX][Abstract]
  
  
• J. Pandremenos, K. Georgoulias, G. Chryssolouris, N. Jufer, J. Bathelt, A shoe design support module towards Mass Customization, 16th International Conference on Concurrent Enterprising, 2010, Lugano, Schweiz, [BibTeX][Abstract]
  
  
• N. Jufer, J. Daaboul, J. Bathelt, D. Politze, F. Laroche, A. Bernard, A. Kunz, Performance Factory in the Context of Mass Customization, 16th International Conference on Concurrent Enterprising, 2010, Lugano, Schweiz, [BibTeX][Abstract][Paper]
  
  
• R. Hofer, A. Kunz, Digisketch: Taming Anoto Technology on LCDs, Engineering Interactive Computing Systems 2010, 2010, Berlin, Deutschland, ISBN 978-1-4503-0083-4, Seiten 103--108, [BibTeX][Abstract][Paper]
  
  
• F. Reichert, A. Kunz, C. Bender, R. Moryson, K. Wegener, Utilization of a Bioinformatics Algorithm for the Comparison of Process Chains, 43rd CIRP International Conference on Manufacturing Systems Sustainable Production and Logistics in Global Networks, 2010, Wien, Österreich, ISBN 978-3-7083-0686-5, Seiten 751--758, [BibTeX][Abstract][Paper]
  
  
• D. Politze, N. Jufer, J. Bathelt, A. Kunz, K. Wegener, AMOR – An Agent for Assisting Monitoring, Optimization and (Re-)Design in Factory Design, 43rd CIRP International Conference on Manufacturing Systems Sustainable Production and Logistics in Global Networks, 2010, Wien, Österreich, ISBN 978-3-7083-0686-5, Seiten 761--768, [BibTeX][Abstract][Paper]
  
  
• F. Reichert, A. Kunz, R. Moryson, K. Wegener, A Key Performance Indicator System of Process Control as a Basis for Relocation Planning, 43rd CIRP International Conference on Manufacturing Systems Sustainable Production and Logistics in Global Networks, 2010, Wien, Österreich, ISBN 978-3-7083-0686-5, Seiten 805--812, [BibTeX][Abstract][Paper]
  
  
• N. Jufer, D. Politze, J. Bathelt, A. Kunz, Performance Factory - A New Approach of Performance Assessment for the Factory of the Future, 7th International DAAAM Baltic Conference, 2010, Tallinn, Estland, ISBN 978-9985-59-982-2, Seiten 209--214, [BibTeX][Abstract][Paper]
  
  
• D. Politze, J. Bathelt, M. Reinhard, N. Jufer, A. Kunz, Interfacing Product Development and Factory Planning - Towards a Unified Life Cycle Management, 7th International DAAAM Baltic Conference, 2010, Tallinn, Estland, ISBN 978-9985-59-982-2, Seiten 334--339, [BibTeX][Abstract][Paper]
  
  
• J. Bathelt, D. Politze, N. Jufer, A. Jönsson, A. Kunz, Factory of the Future Enabled by the Virtual Factory Framework (VFF), 7th International DAAAM Baltic Conference, 2010, Tallinn, Estland, ISBN 978-9985-59-982-2, Seiten 203--208, [BibTeX][Abstract][Paper]
  
  
• B. Migge, T. Schmidt, A. Kunz, POMDP Models for Continuous Calibration of Interactive Surfaces, 2010 AAAI Spring Symposium, Embedded Reasoning: Intelligence in Embedded Systems, 2010, Stanford, USA, ISBN 978-1-57735-458-1, Seiten 86--92, [BibTeX][Abstract][Paper][Slides]
  
  
• T. Piazza, J. Lundström, A. Kunz, M. Fjeld, Predicting Missing Markers in Real-time Optical Motion Capture, 3D Physiological Human Workshop, 2009, Zermatt, Schweiz, ISBN 978-3-642-10468-8, DOI 10.1007/978-3-642-10470-1_11, Band Lecture Notes of Computer Science (LNCS), Nr. 5903, Seiten 125--136, [BibTeX][Abstract][Paper]
  
  
• R. Hofer, A. Kunz, TNT: Touch ‘n’ Tangibles on LC-Displays, 8th International Conference on Entertainment Computing - Lecture Notes of Computer Science, 2009, Paris, Frankreich, ISBN 978-3-642-04051-1, ISSN 1611-3349, Band 5709/2009, Seiten 222--227, [BibTeX][Abstract][Paper][Video]
  
  
• T. Piazza, J. Lundström, A. Hugestrand, A. Kunz, M. Fjeld, Towards Solving the Missing Marker Problem in Realtime Motion Capture, ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 2009, San Diego, USA, ISBN 978-0-7918-4899-9, DOI 10.1115/DETC2009-86517, Seiten 1521--1526, [BibTeX][Abstract][Paper]
  
  
• R. Hofer, T. Nescher, A. Kunz, QualiTrack: Highspeed TUI Tracking for Tabletop Applications, Interact 2009, 2009, Uppsala, Schweden, DOI 10.1007/978-3-642-03658-3_38, Band LNCS 5727, Nr. II, Seiten 332--335, [BibTeX][Abstract][Paper][Video]
  
  
• I. Habib, N. Berggren, E. Rehn, G. Josefsson, A. Kunz, M. Fjeld, DGTS: Integrated Typing and Pointing, Interact 2009, 2009, Uppsala, Schweden, DOI 10.1007/978-3-642-03658-3_30, Band LNCS 5727, Nr. II, Seiten 232--235, [BibTeX][Abstract][Paper][Video]
  
  
• N. Jufer, J. Bathelt, A. Kunz, M. Dürst, Product and Production Configuration Method – enhancing the customer driven value chain by the cognitive dimension, International Conference on Concurrent Enterprising, 2009, Leiden, Niederlande, [BibTeX][Abstract][Paper][Slides]
  
  
• D. Politze, J. Bathelt, Exploitation Method for Functional Product Requirements - An Integrated Function Oriented Approach, Proceedings of the 2009 IEEE International Conference on Mechatronics, 2009, Málaga, Spanien, [BibTeX][Abstract][Paper]
  
  
• D. Politze, S. Dierssen, A Criteria-based Measure of Similarity between Product Functionalities, Proceedings of the 19th CIRP Design Conference - Competitive Design, 2009, Cranfield University, Vereinigtes Königreich, Seiten 99--103, [BibTeX]
  
  
• R. Hofer, D. Naeff, A. Kunz, FLATIR: FTIR Multi-touch Detection on a Discrete Distributed Sensor Array, Tangible and Embedded Interfaces (TEI) 2009, 2009, Cambridge, Vereinigtes Königreich, ISBN 978-1-60558-493-5, DOI 10.1145/1517664.1517730, Seiten 317--322, [BibTeX][Abstract][Paper][Video]
  
  
• D. Politze, S. Dierssen, A Functional Model for the Functions Oriented Description of Customer-Related Functions of High Variant Products, Proceedings of NordDesign 2008, 2008, Tallinn, Estland, Seiten 19--28, [BibTeX]
  
  
• F. Reichert, A. Kunz, R. Moryson, MAE-P3 – A System to Gain Transparency of Production Structure as a Basis for Production Relocation Planning, Nineteenth International Conference on Systems Engineering (ICSENG 2008), 2008, Las Vegas, USA, ISBN 987-0-7695-3331-5, DOI 10.1109/ICSEng.2008.55, Seiten 458--463, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Kunz, IT-unterstützte Kreativprozesse, VR/AR-Technologien für die Produktion, 2008, Chemnitz, Deutschland, ISBN 978-300-024677-7, DOI 10.3929/ethz-a-006039151, Seiten 15--22, [BibTeX][Abstract][Paper]
  
  
• D. Politze, Experiences on Including Variability Information in a Function Oriented Product Documentation, 7th international Heinz Nixdorf Symposium, 2008, Paderborn, Deutschland, [BibTeX]
  
  
• R. Hofer, A. Kunz, P. Kaplan, MightyTrace: Multiuser Tracking Technology on LC-displays, Proceeding of the twenty-sixth annual SIGCHI conference on Human factors in computing systems, 2008, Florence, Italien, ISBN 978-1-60558-011-1, DOI 10.3929/ethz-a-005705488, Seiten 215--218, [BibTeX][Abstract][Paper]
  
  
• C. Ganser Schwab, A. Steinemann, R. Hofer, A. Kunz, InfrActables: Supporting Collocated Group Work by Combining Pen-Based and Tangible Interaction, Proceedings of Tabletop 2007, 2007, Newport, Rhode Island, USA, DOI 10.3929/ethz-a-005705337, [BibTeX][Abstract][Paper][Video]
  
  
• P. Pedrazzoli, D. Rovere, C. Constantinescu, J. Bathelt, M. Pappas, P. Dépincé, G. Chryssolouris, C. Boër, E. Westkämper, High Value Adding VR Tools for Networked Customer-Driven Factory, 4th International Conference on Digital Enterprise Technology, 2007, Bath, Vereinigtes Königreich, ISBN 978-0-86197-141-1, Seiten 347--352, [BibTeX][Abstract][Paper]
  
  
• K. Wang, R. Amin, M. Juang, B. Migge, A Measurement Study for Link Rate Modeling and Handover Optimization for Vehicle Communications over IEEE 802.11g Infrastructure Network, ACM MobiCom workshop on Challenged Networks, 2007, Montreal, Kanada, [BibTeX][Abstract]
  
  
• J. Bathelt, J. Meile, Computer Aided Methods Supporting Concurrent Engineering when designing Mechatronic Systems Controlled by a PLC, Proceedings of International Conference on Manufacturing Automation, 2007, Singapore, Singapur, [BibTeX][Abstract][Paper]
  
  
• R. Hofer, C. Ganser Schwab, A. Kunz, MatrixView: Extending Immersion in Video Conferencing, Adjunct Proceedings of the 19th Annual ACM Symposium on User Interface Software and Technology (UIST) 2006, Montreux, Switzerland, October 15-18, 2006, 2006, Montreux, Schweiz, DOI 10.3929/ethz-a-005713962, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, G. Fadel, J. Taiber, M. Schichtel, Towards Collaboration in Engineering of Tomorrow - Building Highly Interactive Virtual Collaboration Platforms, SAE 2006 World Congress & Exhibition, 2006, Detroit, Mich., USA, [BibTeX][Abstract][Paper]
  
  
• C. Ganser Schwab, A. Steinemann, A. Kunz, InfrActables: Multi-User Tracking System for Interactive Surfaces, Proceedings of the IEEE conference on Virtual Reality (IEEE VR 2006), 2006, Alexandria, Virginia, USA, ISBN 1-4244-0224-7, DOI 10.1109/vr.2006.86, Seiten 253--256, [BibTeX][Abstract][Paper]
  
  
• M. Küchler, A. Kunz, HoloPort – A Device for Simultaneous Video and Data Conferencing Featuring Gaze Awareness, Proceedings of the IEEE conference on Virtual Reality (IEEE VR 2006), 2006, Alexandria, Virginia, USA, ISSN 1087-8270, DOI 10.1109/vr.2006.71, Seiten 81--87, [BibTeX][Abstract][Paper]
  
  
• R. Zhang, A. Kunz, P. Lochmatter, G. Kovacs, Dielectric Elastomer Spring Roll Actuators for a Portable Force Feedback Device, 14th Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems 2006, 2006, Alexandria, Virginia, USA, ISBN 1-4244-0226-3, DOI 10.1109/HAPTIC.2006.1627137, Seiten 347--353, [BibTeX][Abstract][Paper]
  
  
• R. Zhang, A. Kunz, P. Lochmatter, G. Kovacs, Spring Roll Dielectric Elastomer Actuators for a Portable Force Feedback Glove, Proceeding of SPIE 2006 - Electroactive Polymer Actuators and Devices (EAPAD), 2006, San Diego, California, USA, ISBN 9780819462213, DOI 10.1117/12.658524, Band 6168, Seiten 505--516, [BibTeX][Abstract][Paper]
  
  
• R. Hofer, C. Ganser Schwab, A. Kunz, Tracking Technology for Multiple Device Interaction, 18th Annual ACM Symposium on User Interface Software and Technology, 2005, Seattle, Washington, USA, DOI 10.3929/ethz-a-005746141, [BibTeX][Abstract][Paper][Slides]
  
  
• J. Hoffmann, Analyse und Verarbeitung vektorisierter Handskizzen, 16. Symposium Design for X 2005, 2005, Neukirchen, Deutschland, [BibTeX][Abstract][Paper]
  
  
• C. Ganser Schwab, T. Kennel, A. Kunz, N. Birkeland, Computer Supported Environment for Creativity Processes in Globally Distributed Teams, Proceedings of ICED 2005, 2005, Sydney, Australien, ISBN 1-904670-00-8, DOI 10.3929/ethz-a-006039179, Seiten 109--110, [BibTeX][Abstract][Paper]
  
  
• J. Bathelt, A. Jönsson, C. Bacs, S. Dierssen, M. Meier, Applying the New Design Guideline 2206 on Mecahtronic Systems Controlled by a PLC, International Conference on Engineering Design, 2005, Melbourne, Australien, [BibTeX][Abstract][Paper]
  
  
• J. Bathelt, U. Frey, M. Fankhauser, A. Jönsson, S. Dierssen, M. Meier, A New Guideline to Develop a Lecture - Using the VDI 2221 Frame - Applied on a a Mechatronic Course, International Conference on Engineering Design, 2005, Melbourne, Australien, [BibTeX][Abstract][Paper]
  
  
• A. Mazzone, A. Kunz, Sketching the Future of the SmartMesh Wide Area Haptic Feedback Device by Introducing the Controlling Concept for such a Deformable Multi-Loop Mechanism, WorldHaptics - First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, 2005, Pisa, Italien, ISBN 0-7695-2310-2, DOI 10.1109/WHC.2005.116, Seiten 308--315, [BibTeX][Abstract][Paper]
  
  
• M. Küchler, A. Kunz, Imperceptible Projection Blanking for Reliable Segmentation within Mixed Reality Applications, 9th Int. Workshop on Immersive Projection Technology, 11th Eurographics Workshop on Virtual Environments, 2005, Aalborg, Dänemark, ISBN 3-905673-21-5, ISSN 1727-530X, DOI 10.2312/EGVE/IPT_EGVE2005/023-030, Seiten 23--30, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, R. Moryson, Minimierung der Prozesskette in der Grobplanungsphase der Produktionsplanung, 15. Symposium Design for X, 2004, Neukirchen, Deutschland, ISBN 3-9808539-2-6, DOI 10.3929/ethz-a-006039229, Seiten 65--75, [BibTeX][Abstract][Paper]
  
  
• M. Meier, S. Dierssen, J. Bathelt, Die Virtuelle Maschine - oder wie Inbetriebnahme vor Montage möglich ist, 4.Chemnitzer Produktionstechnisches Kolloquium, 2004, Chemnitz, Deutschland, [BibTeX][Slides]
  
  
• A. Mazzone, C. Spagno, A. Kunz, Morphing the SmartMesh: Proposing a Novel Control Architecture, Eurohaptics 2004, 2004, Munich, Deutschland, Seiten 467--472, [BibTeX][Abstract][Paper]
  
  
• R. Zhang, A. Kunz, A. Mazzone, S. Michel, G. Kovacs, Dielectric Elastomer Actuators for A Portable Force Feedback Device, 4th International Conference Eurohaptics 2004, 2004, München, Deutschland, ISBN 3980961400, DOI 10.3929/ethz-a-010090533, Seiten 300--307, [BibTeX][Abstract][Paper]
  
  
• A. Mazzone, C. Spagno, A. Kunz, The HoverMesh: A Deformable Structure Based on Vacuum Cells, Proceedings of the 2004 ACM SIGCHI International Conference on Advances in computer entertainment technology, 2004, Singapur, ISBN 1-58113-882-2, DOI 10.1145/1067343.1067366, Seiten 187--193, [BibTeX][Abstract][Paper]
  
  
• J. Bathelt, A. Jönsson, How to Implement the Virtual Machine Concept Using xPC Target, Nordic MATLAB Conference 2003, 2003, Copenhagen, Dänemark, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, R. Moryson, CAPP-basierter Assistent für Digitale Fabrik Tools innerhalb des Produktentstehungsprozesses, 14. Symposium Design for X, 2003, Neukirchen, Deutschland, ISBN 3-9808539-1-8, DOI 10.3929/ethz-a-006039256, Seiten 11--24, [BibTeX][Abstract][Paper]
  
  
• A. Mazzone, R. Zhang, A. Kunz, Novel Actuators for Haptic Displays based on Electroactive Polymers, Proceedings of the ACM symposium on Virtual reality software and technology 2003, 2003, Osaka, Japan, ISBN 1-58113-569-6, DOI 10.1145/1008653.1008688, Seiten 196--204, [BibTeX][Abstract][Paper]
  
  
• A. Mazzone, C. Spagno, A. Kunz, A Haptic Feedback Device based on an Active Mesh, Proceedings of the ACM symposium on Virtual reality software and technology 2003, 2003, Osaka, Japan, ISBN 1-58113-569-6, DOI 10.1145/1008653.1008687, Seiten 188--195, [BibTeX][Abstract][Paper]
  
  
• J. Bathelt, A. Jönsson, A. Kunz, C. Bacs, M. Meier, Conceptual Design Approach for Mechatronic Systems Controlled by a Programmable Logic Controller (PLC), 14th International Conference on Engineering Design 2003, 2003, Stockholm, Schweden, ISBN 1-904670-00-8, DOI 10.3929/ethz-a-010090693, Seiten 497--498, [BibTeX][Paper]
  
  
• M. Gross, S. Würmlin, M. Naef, E. Lamboray, C. Spagno, A. Kunz, E. Koller-Meier, T. Svoboda, L. Van Gool, S. Lang, K. Strehlke, A. VandeMoere, O. Staadt, blue-c: A Spatially Immersive Display and 3D Video Portal for Telepresence, Proceedings of ACM SIGGRAPH 2003, 2003, San Diego, California, USA, ISBN 1-58113-709-5, DOI 10.1145/882262.882350, Band 2, Nr. 3, Seiten 819--827, [BibTeX][Abstract][Paper]
  
  
• A. Mazzone, C. Spagno, A. Kunz, R. Zhang, SmartMesh: A Smart Structure for Object Creation, Eurohaptics 2003, 2003, Dublin, Irland, DOI 10.3929/ethz-a-006039128, Seiten 451--455, [BibTeX][Abstract][Paper]
  
  
• J. Bathelt, A. Jönsson, C. Bacs, M. Meier, Modularisierung SPS-gesteuerter mechatronischer Systeme, 1. Paderborner Workshop Intelligente Mechatronische Systeme, 2003, Paderborn, Deutschland, [BibTeX][Abstract][Paper]
  
  
• A. Jönsson, J. Bathelt, G. Broman, Interacting with real time simulations – virtual reality in industry applications, Immersive Projection Technology and Virtual Environments 2003, 2003, Zürich, Schweiz, ISBN 1-58113-686-2, Seiten 305--306, [BibTeX][Abstract][Paper]
  
  
• C. Spagno, A. Kunz, Construction of a Three-Sided Immersive Telecollaboration System, Proceeding of the IEEE Virtual Reality Conference 2003, 2003, Los Angeles, California, USA, ISBN 0-7695-1882-6, ISSN 1087-8270, DOI 10.1109/vr.2003.1191119, Seiten 37--44, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, C. Spagno, VR zur Unterstützung des kollaborativen Arbeitens, 13. Symposium Design for X 2002, 2002, Neukirchen, Deutschland, ISBN 3-9808539-0-X, Seiten 109--116, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, S. Müller, Tool zur effizienten Durchführung einer FMEA-Sitzung, 13. Symposium Design for X 2002, 2002, Neukirchen, Deutschland, ISBN 3-9808539-0-X, DOI 10.3929/ethz-a-006039295, Seiten 171--178, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, S. Müller, IT-Unterstützung für die Metaplantechnik, 13. Symposium Design for X 2002, 2002, Neukirchen, Deutschland, ISBN 3-9808539-0-X, DOI 10.3929/ethz-a-006039389, Seiten 199--206, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, T. Kennel, A. Mazzone, S. Müller, Workplace to Support the Teamwork in the Early Stages of the Product Development Process, Proceedings of Virtual Concept 2002, 2002, Biarritz, Frankreich, ISBN 2-9514772-2-8, DOI 10.3929/ethz-a-006039406, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, T. Kennel, U. Hugentobler, Development of a Digital Lectern for Teleteaching, ASME Design Engineering Technical Conferences (DETC) and Computers and Information in Engineering Conference (CIE) 2002, 2002, Montreal, Kanada, DOI 10.1115/DETC2002/CIE-34414, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Kunz, T. Kennel, M. Meier, Ein neues Präsentationstool für die Lehre, 47. Internationales Wissenschaftliches Kolloquium IWK, 2002, Ilmenau, Deutschland, ISBN 0943-7207, DOI 10.3929/ethz-a-006042039, Seiten 606--607, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, C. Spagno, Technical System for Collaborative Work, Eurographics Workshop on Virtual Environments 2002, 2002, Barcelona, Spanien, ISBN 1-58113-535-1, DOI 10.3929/ethz-a-006050425, Seiten 73--80, [BibTeX][Abstract][Paper]
  
  
• A. Breiing, A. Kunz, Critical Consideration and Improvement of the FMEA, Tools and methods of competitive engineering - TMCE 2002, 2002, Wuhan, China, ISBN 7-5609-2682-7, DOI 10.3929/ethz-a-006042074, Seiten 519--530, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, C. Spagno, Simultaneous Projection and Picture Acquisition for a Distributed Collaborative Environment, Proceedings of the IEEE Virtual Reality 2002 Conference, 2002, Orlando, Florida, USA, ISBN 0-7695-1492-8, DOI 10.1109/vr.2002.996538, Seiten 279--280, [BibTeX][Abstract][Paper]
  
  
• A. Breiing, A. Kunz, Kritische Betrachtunng und Verbesserung der FMEA, 12. Symposium Design for X 2001, 2001, Neukirchen, Deutschland, ISBN 3-00-008364-2, DOI 10.3929/ethz-a-006042119, Seiten 15--20, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, S. Müller, T. Kennel, K. Lauche, K. Mbiti, Supporting the Teamwork by New Means of the Information Technology, International Conference on Engineering Design ICED 2001, 2001, Glasgow, Vereinigtes Königreich, ISBN 1-86058-355-5, DOI 10.3929/ethz-a-006042141, Seiten 425--432, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, M. Meier, Innovation at the Digital Product - the Use of Virtual Reality in Product Development Processes, International Conference on Engineering Design ICED 2001, 2001, Glasgow, Vereinigtes Königreich, ISBN 1-86058-354-7, DOI 10.3929/ethz-a-006042186, Seiten 693--700, [BibTeX][Abstract][Paper]
  
  
• T. Kennel, A. Kunz, S. Müller, Innoplan - An Adaptation of the Metaplantechnique for a Novel Computer Supported Method of Teamwork, International Conference on Engineering Design ICED 2001, 2001, Glasgow, Vereinigtes Königreich, ISBN 1-86058-354-7, DOI 10.3929/ethz-a-006042219, Seiten 387--394, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, C. Spagno, Novel Shutter Glass Control for Simultaneous Projection and Picture Acquisition, Immersive Projection Technology and Virtual Environments 2001, 2001, Stuttgart, Deutschland, ISBN 3-211-83671-3, DOI 10.1007/978-3-7091-6221-7_26, Seiten 257--266, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, C. Spagno, Modified Shutter Glasses for Projection and Picture Acquisition in Virtual Environments, Proceedings of the IEEE Virtual Reality 2001 Conference, 2001, Yokohama, Japan, ISBN 0-7695-0948-7, DOI 10.1109/vr.2001.913797, Seiten 281--282, [BibTeX][Abstract][Paper]
  
  
• O. Staadt, M. Gross, A. Kunz, M. Meier, The Blue-C: Integrating Real Humans into a Networked Immersive Environment, Proceedings of the third international conference on Collaborative virtual environments, 2000, San Francisco, CA, USA, ISBN 1-58113-303-0, DOI 10.3929/ethz-a-005792478, Seiten 201--202, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, A. Burri, Design and Construction of a new haptic interface, ASME Design Eingineering Technical Conferences (DETC) and Computers and Information in Engineering Conference (CIE) 2000, 2000, Baltimore, USA, Seiten 10--15, [BibTeX][Abstract][Paper]
  
  
• O. Niedermann, S. Keller, A. Kunz, M. Meier, Einsatz der Informationstechnologie in der FMEA, Proceedings of The FMEA Benutzertreffen, 1999, Fürth, Deutschland, DOI 10.3929/ethz-a-010107573, [BibTeX][Abstract][Paper]
  
  
• W. Elspass, A. Kunz, Portable haptic interface with active functinal design, Proceedings of SPIE, the International Society for Optical Engineering, 1999, San Francisco, CA, USA, ISSN 0277-786X, DOI 10.1117/12.350767, Band 3668, Nr. 2, Seiten 926--932, [BibTeX][Abstract][Paper]
  
  
• B. Seybold, F. Metzger, G. Ogan, J. Bathelt, F. Collenberg, J. Taiber, K. Simon, M. Engeli, Spatial Modelling with Geometric Constraints, Proceedings of the Third International Conference on the Practical Application of Constraint Technology, 1997, London, Vereinigtes Königreich, Seiten 307--320, [BibTeX][Abstract][Paper]
  
  
• S. Klein, A. Kecskeméthy, J. Bathelt, F. Collenberg, G. Régnault, Effiziente kinematische Verarbeitung von Zusammenbauten in feature-basierten CAD-Systemen, Tagungsband Getriebetechnik-Kolloquium, 1997, Warnemünde, Deutschland, Seiten 103--113, [BibTeX][Abstract][Paper]