Curriculum vitae

Conferences

• J. Gisler, D. Dedic, V. Holzwarth, A. Kunz, Effects of Attention Guidance on Virtual Reality Training for an Industrial Assembly Task, 9th International Conference of the Immersive Learning Research Network, 2023, San Luis Obispo, USA, [BibTeX][Abstract][Paper][Slides][Video]
  
  
• L. Walker, J. Gisler, K. Caplazi, V. Holzwarth, C. Hirt, A. Kunz, Comparing Mixed Reality Hand Gestures to Artificial Instruction Means for Small Target Objects, Proceedings of Eighth International Congress on Information and Communication Technology, 2023, London, United Kingdom, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, M. Ketzel, P. Graf, C. Holz, A. Kunz, Short-term Path Prediction for Spontaneous Human Locomotion in Arbitrary Virtual Spaces, 21st IEEE International Symposium on Mixed and Augmented Reality, 2022, Singapur, Singapore, DOI 10.1109/ISMAR-Adjunct57072.2022.00116, Pages 554-559, [BibTeX][Abstract][Paper]
  
  
• F. vandenOever, V. Gorobets, B. Sætrevik, M. Fjeld, A. Kunz, Comparing Visual Search between Physical Environments and VR, 21st IEEE International Symposium on Mixed and Augmented Reality, 2022, Singapore, Singapore, DOI 10.1109/ISMAR-Adjunct57072.2022.00089, Pages 411--416, [BibTeX][Abstract][Paper]
  
  
• V. Gorobets, C. Merkle, A. Kunz, Pointing, Pairing and Grouping Gesture Recognition in Virtual Reality, ICCHP Conference on Computers Helping People with Special Needs, 2022, Lecco, Italy, ISBN 978-3-031-08648-9, DOI 10.1007/978-3-031-08648-9_36, Volume Lecture Notes in Computer Science, Issue 13341, Pages 313--320, [BibTeX][Abstract][Paper]
  
  
• M. Lutfallah, B. Käch, C. Hirt, A. Kunz, Emotion Recognition - A tool to improve meeting experience for visually impaired, ICCHP Conference on Computers Helping People with Special Needs, 2022, Lecco, Italy, ISBN 978-3-031-08648-9, DOI 10.1007/978-3-031-08648-9_35, Volume Lecture Notes in Computer Science, Issue 13341, Pages 305--312, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, R. Koutny, K. Miesenberger, Accessibility of Co-Located Meetings - Introduction to the Special Thematic Session, ICCHP Conference on Computers Helping People with Special Needs, 2022, Lecco, Italy, ISBN 978-3-031-08648-9, DOI 10.1007/978-3-031-08648-9_33, Volume Lecture Notes in Computer Science, Issue 13341, Pages 289--294, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, Y. Kompis, C. Holz, A. Kunz, The Chaotic Behavior of Redirection – Revisiting Simulations in Redirected Walking, IEEE Conference on Virtual Reality and 3D User Interfaces, 2022, Christchurch, New Zealand, DOI 10.1109/VR51125.2022.00072, Pages 524--533, [BibTeX][Abstract][Paper][Video]
  
  
• C. Hirt, M. Ketzel, P. Graf, C. Holz, A. Kunz, Heuristic Short-term Path Prediction for Spontaneous Human Locomotion in Virtual Open Spaces, IEEE Conference on Virtual Reality and 3D User Interfaces, 2022, Christchurch, New Zealand, DOI 10.1109/VRW55335.2022.00169, Pages 636--637, [BibTeX][Abstract][Paper]
  
  
• V. Holzwarth, C. Hirt, J. Gisler, A. Kunz, Virtual Reality Extension for Digital Twins of Machine Tools, Smart Services Summit 2021, 2021, Zurich, Switzerland, DOI 10.1007/978-3-030-97042-0_8, Pages 77--84, [BibTeX][Abstract][Paper]
  
  
• N. Dhingra, G. Chogovadze, A. Kunz, Border-SegGCN: Improving Semantic Segmentation by Refining the Border Outline using Graph Convolutional Network, 2021 IEEE/CVF International Conference on Computer Vision Workshops, 2021, Virtual, Pages 865--875, [BibTeX][Abstract][Paper]
  
  
• E. Nonino, J. Gisler, V. Holzwarth, C. Hirt, A. Kunz, Subtle Attention Guidance for Real Walking in Virtual Environments, IEEE International Symposium on Mixed and Augmented Reality, 2021, Bari, Italy, DOI 10.1109/ISMAR-Adjunct54149.2021.00070, Pages 320--325, [BibTeX][Abstract][Paper]
  
  
• J. Gisler, J. Schneider, J. Handali, V. Holzwarth, C. Hirt, W. Fuhl, J. Brocke, A. Kunz, Indicators of Training Success in Virtual Reality Using Head and Eye Movements, IEEE International Symposium on Mixed and Augmented Reality, 2021, Bari, Italy, DOI 10.1109/ISMAR-Adjunct54149.2021.00064, Pages 290--295, [BibTeX][Abstract][Paper]
  
  
• S. Liechti, N. Dhingra, A. Kunz, Detection and Localisation of Pointing, Pairing and Grouping Gestures for Brainstorming Meeting Applications, 23rd International Conference on Human-Computer Interaction, 2021, Washington, USA, ISBN 978-3-030-78642-7, DOI 10.1007/978-3-030-78642-7_4, Pages 22--29, [BibTeX][Abstract][Paper]
  
  
• K. Le, Q. Tran, K. Chlasta, K. Krejtz, M. Fjeld, A. Kunz, VXSlate: Exploring Combination of Head Movements and Mobile Touch for Large Virtual Display Interaction, ACM Designing Interactive Systems, 2021, virtual, DOI 10.1145/3461778.3462076, Pages 283--297, [BibTeX][Abstract][Paper][Video]
  
  
• V. Holzwarth, S. Steiner, J. Schneider, B. vom, A. Kunz, BIM-enabled Issue and Progress Tracking Services using Mixed Reality, Smart Services Summit - Digital as an Enabler for Smart Services Business, 2021, online, Switzerland, ISBN 978-3-030-72089-6, DOI 10.1007/978-3-030-72090-2_5, Pages 49--58, [BibTeX][Abstract][Paper]
  
  
• N. Dhingra, F. Ritter, A. Kunz, BGT-Net: Bidirectional GRU Transformer Network for Scene Graph Generation, Computer Vision and Pattern Recognition, 2021, virtual, Pages 2150 - 2159, [BibTeX][Abstract][Paper][Slides]
  
  
• J. Gisler, V. Holzwarth, C. Hirt, A. Kunz, Work-in-Progress Paper: Enhancing Training in Virtual Reality with Hand Tracking and a Real Tool, 7th International Conference of the Immersive Learning Research Network, 2021, virtual, ISBN 978-1-7348995-2-8/21, DOI 10.23919/iLRN52045.2021.9459332, Pages 244--246, [BibTeX][Abstract][Paper]
  
  
• K. Le, T. Tran, K. Chlasta, K. Krejtz, M. Fjeld, A. Kunz, VXSlate: Combining Head Movement and Mobile Touch for Large Virtual Display Interaction, IEEE Virtual Reality, 2021, virtual, DOI 10.1109/VRW52623.2021.00146, Pages 528--529, [BibTeX][Abstract][Paper][Video]
  
  
• V. Holzwarth, J. Gisler, C. Hirt, A. Kunz, Comparing the Accuracy and Precision of SteamVR Tracking 2.0 and Oculus Quest 2 in a Room Scale Setup, 5th International Conference on Virtual and Augmented Reality Simulations, 2021, Melbourne, Australia, ISBN 978-1-4503-8932-7, DOI 10.1145/3463914.3463921, Pages 42--46, [BibTeX][Abstract][Paper]
  
  
• Y. Rothacher, A. Nguyen Thi, E. Efthymiou, E. Werth, C. Baumann, B. Lenggenhager, P. Brugger, A. Kunz, L. Imbach, Dissociation of motor control from motor awareness in awake sleepwalkers: An EEG study in virtual reality, medRxiv, 2020, online, DOI 10.1101/2020.11.17.20233072, [BibTeX][Abstract][Paper]
  
  
• A. Nguyen Thi, P. Wüest, A. Kunz, Human Following Behavior In Virtual Reality, ACM Symposium on Virtual Reality Software and Technology, 2020, Ottawa, Canada, DOI 10.1145/3385956.3422099, Pages Article 57, [BibTeX][Abstract][Paper]
  
  
• A. Nguyen Thi, Y. Rothacher, B. Lenggenhager, P. Brugger, E. Efthymiou, L. Imbach, A. Kunz, Effect of Cognitive Load on Curvature Redirected Walking Thresholds, ACM Symposium on Virtual Reality Software and Technology, 2020, Ottawa, Canada, DOI 10.1145/3385956.3418950, Pages Article 17, [BibTeX][Abstract][Paper]
  
  
• J. Gisler, C. Hirt, V. Holzwarth, A. Kunz, Designing Virtual Training Environments: Does Immersion increase Task Performance?, Cyberworlds 2020, 2020, Caen, France, ISBN 978-1-7281-6497-7, DOI 10.1109/CW49994.2020.00026, Pages 125--128, [BibTeX][Abstract][Paper][Video]
  
  
• A. Nguyen Thi, Y. Rothacher, B. Lenggenhager, P. Brugger, A. Kunz, Effect of Sense of Embodiment on Curvature Redirected Walking Thresholds, ACM Symposium on Applied Perception 2020, 2020, online, ISBN 978-1-4503-7618-1/20/07, DOI 10.1145/3385955.3407932, Pages Article 16, [BibTeX][Abstract][Paper]
  
  
• N. Dhingra, R. Koutny, S. Günther, K. Miesenberger, M. Mühlhäuser, A. Kunz, Pointing Gesture Based User Interaction of Tool Supported Brainstorming Meetings, 17th International Conference on Computers Helping People with Special Needs, 2020, online, DOI 10.1007/978-3-030-58805-2_3, Volume Lecture Notes in Computer Science, Issue 12377, Pages 21--29, [BibTeX][Abstract][Paper]
  
  
• R. Koutny, S. Günther, N. Dhingra, A. Kunz, K. Miesenberger, M. Mühlhäuser, Accessible Multimodal Tool Support for Brainstorming Meetings, 17th International Conference on Computers Helping People with Special Needs, 2020, online, DOI 10.1007/978-3-030-58805-2_2, Volume Lecture Notes in Computer Science, Issue 12377, Pages 11--20, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, K. Miesenberger, M. Mühlhäuser, Accessibility of Non-Verbal Communication: Making Spatial Information Accessible to People with Disabilities - Introduction to the Special Thematic Session, 17th International Conference on Computers Helping People with Special Needs, 2020, online, DOI 10.1007/978-3-030-58805-2_1, Volume Lecture Notes in Computer Science, Issue 12377, Pages 3--10, [BibTeX][Abstract][Paper]
  
  
• N. Dhingra, E. Valli, A. Kunz, Recognition and Localisation of Pointing Gestures using a RGB-D Camera, 22nd International Conference on Human-Computer Interaction, 2020, Kopenhagen, Denmark, ISBN 978-3-030-50725-1, ISSN 978-3-030-50726-8, DOI 10.1007/978-3-030-50726-8_27, Pages 205--212, [BibTeX][Abstract][Paper]
  
  
• N. Dhingra, C. Hirt, M. Angst, A. Kunz, Eye Gaze Tracking for Detecting Non-verbal Communication in Meeting Environments, 15th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications, 2020, Valetta, Malta, DOI 10.5220/0009359002390246, Pages HUCAPP20-RP-47, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, M. Spahni, Y. Kompis, D. Jetter, A. Kunz, Alles rund um die Maschine - Begehbare virtuelle Schulung an Werkzeugmaschinen, VAR2 - Realität erweitern, 2019, Chemnitz, Germany, ISBN 978-3-00-064420-7, Pages 43--58, [BibTeX][Abstract][Paper]
  
  
• K. Le,, P. Wozniak,, A. Alavi, M. Fjeld, A. Kunz, DigiMetaplan: Supporting Facilitated Brainstorming for Distributed Business Teams, International Conference on Mobile and Ubiquitous Multimedia, 2019, Pisa, Italy, ISBN 978-1-4503-7624-2, DOI 10.1145/3365610.3365637, Pages Paper 36, [BibTeX][Abstract][Paper]
  
  
• N. Dhingra, A. Kunz, Res3ATN - Deep 3D Residual Attention Network for Hand Gesture Recognition in Videos, International Conference on 3D Vision 2019, 2019, Quebec, Canada, ISSN 2475-7888, DOI 10.1109/3DV.2019.00061, Pages 491--501, [BibTeX][Abstract][Paper]
  
  
• V. Holzwarth, J. Schneider, A. Kunz, J. vomBrocke, Approaching data driven services in the built environment, Smart Services Summit 2019, 2019, Zürich, Switzerland, ISBN 978-3-033-07563-4, Pages 18--21, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, V. Holzwarth, J. Gisler, J. Schneider, A. Kunz, Virtual Learning Environment for an Industrial Assembly Task, IEEE 9th International Conference on Consumer Electronics, 2019, Berlin, Germany, ISBN 978-1-7281-2775-0, ISSN 2166-6822, DOI 10.1109/ICCE-Berlin47944.2019.8966169, Pages 337--342, [BibTeX][Abstract][Paper]
  
  
• V. Holzwarth, J. Schneider, A. Kunz, J. vomBrocke, Data driven value creation in AEC along the building lifecycle, CISBAT, 2019, Lausanne, Switzerland, DOI 10.1088/1742-6596/1343/1/012046, Volume J. Phys.: Conf. Ser. 1343 012046, Pages 1343 (2019) 012046, [BibTeX][Abstract][Paper]
  
  
• K. Le, I. Avellino, C. Fleury, M. Fjeld, A. Kunz, GazeLens: Guiding Attention to Improve Gaze Interpretation in Hub-Satellite Collaboration, 17th IFIP TC.13 International Conference on Human-Computer Interaction, 2019, Paphos, Chipre, ISBN 978-3-030-29383-3, DOI 10.1007/978-3-030-29384-0_18, Pages 282--303, [BibTeX][Abstract][Paper]
  
  
• J. Kubenke, A. Kunz, Potentials of IT-supported Assistive Systems: Comparison of two User Studies in the Manufacturing Industry, 9th IFAC Triannual Conference on Manufacturing Modeling, Management and Control, 2019, Berlin, Germany, ISSN 2405-8963, DOI 10.1016/j.ifacol.2019.11.474, Pages 1866--1871, [BibTeX][Abstract][Paper]
  
  
• S. Günther, R. Koutny, N. Dhingra, M. Funk, C. Hirt, K. Miesenberger, M. Mühlhäuser, A. Kunz, MAPVI: Meeting Accessibility for Persons with Visual Impairments, PErvasive Technologies Related to Assistive Environments, 2019, Rhodes, Greece, ISBN 978-1-4503-6232-0, DOI https://doi.org/10.1145/3316782.3322747, Pages 343--352, [BibTeX][Abstract][Paper][Slides]
  
  
• C. Hirt, M. Zank, A. Kunz, Short-term Path Prediction for Virtual Open Spaces, IEEE Virtual Reality 2019, 2019, Osaka, Japan, ISBN 978-1-7281-1377-7, ISSN 2642-5254, DOI 10.1109/VR.2019.8797709, Pages 978--979, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, M. Zank, A. Kunz, PReWAP: Predictive Redirected Walking using Artificial Potential Fields, IEEE Virtual Reality 2019, 2019, Osaka, Japan, ISBN 978-1-7281-1378-4, ISSN 2642-5254, DOI 10.1109/VR.2019.8798118, Pages 976--977, [BibTeX][Abstract][Paper]
  
  
• A. Nguyen Thi, A. Kunz, Discrete Scene Rotation During Blinks and Its Effect on Redirected Walking Algorithms, 24th ACM Symposium on Virtual Reality Software and Technology, 2018, Tokyo, Japan, ISBN 978-1-4503-6086-9, DOI 10.1145/3281505.3281515, Pages No. 29, [BibTeX][Abstract][Paper]
  
  
• J. Kubenke, P. Roh, A. Kunz, Assessing the Efficiency of Information Retrieval from the Digital Shadow at the Shop Floor using IT Assistive Systems, Mechatronics 2018, 2018, Glasgow, United Kingdom, ISBN 978-1-909522-37-4, Pages 202--209, [BibTeX][Abstract][Paper]
  
  
• A. Nguyen Thi, Y. Rothacher, B. Lenggenhager, P. Brugger, A. Kunz, Individual differences and impact of gender on curvature redirection thresholds, 2018 ACM Symposium on Applied Perception, 2018, Vancouver, Canada, ISBN 978-1-4503-5894-1, DOI 10.1145/3225153.3225155, Pages Paper 5, [BibTeX][Abstract][Paper]
  
  
• L. Clack, C. Hirt, M. Wenger, D. Saleschus, A. Kunz, H. Sax, VIRTUE – A Virtual Reality Trainer for Hand Hygiene, International Workshop on Immersive Technologies and Serious Gaming for Health Professions Education, 2018, Zakynthos, Greece, ISBN 978-1-5386-8161-9, ISSN 978-1-5386-8162-6, DOI 10.1109/IISA.2018.8633588, Pages 1--2, [BibTeX][Abstract][Paper]
  
  
• J. Kubenke, A. Kunz, Efficient Motion Analysis of IT Support for Information Retrieval at Manual Workplaces, 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 2018, Neapel, Italy, ISSN 2212-8271, DOI 10.1016/j.procir.2019.02.049, Volume 79C, Pages 210--214, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, K. Miesenberger, L. Zeng, G. Weber, Virtual Navigation Environment for Blind and Low Vision People, 16th Biennial International Conference on Computers Helping People with Special Needs, 2018, Linz, Austria, DOI 10.1007/978-3-319-94274-2_17, Volume LNCS 10897, Issue 2, Pages 114--122, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, M. Zank, A. Kunz, Geometry Extraction for Ad Hoc Redirected Walking using a SLAM Device, 5th International Conference on Augmented Reality, Virtual Reality and Computer Graphics, 2018, Lecce, Italy, DOI 10.1007/978-3-319-95270-3_3, Volume LNCS, Issue 10850, Pages 35--53, [BibTeX][Abstract][Paper]
  
  
• A. Nguyen Thi, M. Inhelder, A. Kunz, Discrete Rotation during Eye-Blink, 5th International Conference on Augmented Reality, Virtual Reality and Computer Graphics, 2018, Lecce, Italy, DOI 10.1007/978-3-319-95270-3_13, Volume LNCS, Issue 10850, Pages 183--189, [BibTeX][Abstract][Paper][Slides]
  
  
• P. Roh, A. Kunz, T. Netland, Data-driven detection of moving bottlenecks in multi-variant production lines, 16th IFAC Symposium on Information Control Problems in Manufacturing, 2018, Bergamo, Italy, DOI 10.1016/j.ifacol.2018.08.251, Volume 51, Issue 11, Pages 158--163, [BibTeX][Abstract][Paper]
  
  
• Y. Rothacher, A. Nguyen Thi, B. Lenggenhager, A. Kunz, P. Brugger, Visual Capture of Gait in Redirected Walking, Measuring Behavior, 2018, Manchester, United Kingdom, ISBN 978-1-910029-39-8, DOI 10.3929/ethz-b-000269155, Pages 427--428, [BibTeX][Abstract][Paper]
  
  
• J. Kubenke, A. Kunz, Efficiency Measurement of IT Support for Information Retrieval at Manual Workplaces, IEEE International Conference on Industrial Cyber-Physical Systems, 2018, St. Petersburg, Russian Federation, ISBN 978-1-5386-6530-5/18, DOI 10.1109/ICPHYS.2018.8390768, Pages 567--572, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, M. Zank, A. Kunz, Preliminary Environment Mapping for Redirected Walking, 25th IEEE Conference on Virtual Reality and 3D User Interfaces, 2018, Reutlingen, Germany, DOI 10.1109/VR.2018.8446262, Pages 573--574, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Nguyen Thi, Y. Rothacher, A. Kunz, P. Brugger, B. Lenggenhager, Effect of Environment Size on Curvature Redirected Walking Thresholds, 25th IEEE Conference on Virtual Reality and 3D User Interfaces, 2018, Reutlingen, Germany, DOI 10.1109/VR.2018.8446225, Pages 645--646, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Kunz, K. Wegener, Der Einsatz der virtuellen Realität in der Produktionsplanung, 4. Fachkonferenz zu VR/AR-Technologien in Anwendung und Forschung an der Professur Werkzeugmaschinen und Umformtechnik, 2017, Chemnitz, Germany, ISBN 978-3-00-058419-0, DOI 10.3929/ethz-b-000218665, Pages 27--36, [BibTeX][Abstract][Paper]
  
  
• A. Nguyen Thi, A. Kunz, Y. Rothacher, P. Brugger, B. Lenggenhager, Spontaneous Alternation Behavior in Humans, ACM Symposium on Virtual Reality Software and Technology, 2017, Göteborg, Sweden, ISBN 978-1-4503-5548-3, DOI 10.1145/3139131.3139168, Pages 21:1--21.4, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, M. Zank, A. Kunz, Real-time Wall Outline Extraction for Redirected Walking, ACM Symposium on Virtual Reality Software and Technology, 2017, Göteborg, Sweden, ISBN 978-1-4503-5548-3, DOI 10.1145/3139131.3143416, Pages 72:1--72:2, [BibTeX][Abstract][Paper][Slides]
  
  
• K. Le, M. Fjeld, A. Alavi, A. Kunz, Immersive Environment for Distributed Creative Collaboration, ACM Symposium on Virtual Reality Software and Technology, 2017, Göteborg, Sweden, ISBN 978-1-4503-5548-3, DOI 10.1145/3139131.3139163, Pages 16:1--16:4, [BibTeX][Abstract][Paper][Video]
  
  
• A. Nguyen Thi, F. Cervellati, A. Kunz, Gain Compensation in Redirected Walking, ACM Symposium on Virtual Reality Software and Technology, 2017, Göteborg, Sweden, ISBN 978-1-4503-5548-3, DOI 10.1145/3139131.3139167, Pages 20:1--20:4, [BibTeX][Abstract][Paper]
  
  
• M. Engeler, A. Elmiger, A. Kunz, D. Zogg, K. Wegener, Online Condition Monitoring Tool for Automated Machinery, 16th CIRP Conference on Modeling of Machining Operations, 2017, Cluny, France, DOI 10.1016/j.procir.2017.04.003, Volume 58, Pages 323--328, [BibTeX][Abstract][Paper]
  
  
• M. Zank, A. Kunz, Optimized Graph Extraction and Locomotion Prediction for Redirected Walking, IEEE Symposium on 3D User Interfaces, 2017, Los Angeles, USA, ISBN 978-1-5090-6715-2, DOI 10.1109/3DUI.2017.7893328, Pages 120--129, [BibTeX][Abstract][Paper]
  
  
• M. Zank, C. Yao, A. Kunz, Multi-phase Wall Warner System for Real Walking in Virtual Environments, IEEE Symposium on 3D User Interfaces, 2017, Los Angeles, USA, ISBN 978-1-5090-6715-2, DOI 10.1109/3DUI.2017.7893352, Pages 223--224, [BibTeX][Abstract][Paper][Slides]
  
  
• T. Bänziger, A. Kunz, K. Wegener, A Library of Skills and Behaviors for Smart Mobile Assistant Robots in Automotive Assembly Lines, The 2017 Conference on Human-Robot Interaction, 2017, Wien, Austria, ISBN 978-1-4503-4885-0, DOI 10.1145/3029798.3038415, Pages 77--78, [BibTeX][Abstract][Paper][Slides]
  
  
• F. Soffel, M. Zank, A. Kunz, Postural Stability Analysis In Virtual Reality Using the HTC Vive, The ACM Symposium on Virtual Reality Software and Technology 2016, 2016, München, Germany, ISBN 978-1-4503-4491-3, DOI 10.1145/2993369.2996341, Pages 351--352, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, L. Brogli, A. Alavi, Interference Measurement of Kinect for Xbox One, The ACM Symposium on Virtual Reality Software and Technology 2016, 2016, München, Germany, ISBN 978-1-4503-4491-3, DOI 10.1145/2993369.2996329, Pages 345--346, [BibTeX][Abstract][Paper]
  
  
• A. Nguyen Thi, Y. Rothacher, P. Brugger, B. Lenggenhager, A. Kunz, Estimation of individual redirected walking thresholds using standard perception tests, The ACM Symposium on Virtual Reality Software and Technology 2016, 2016, München, Germany, ISBN 978-1-4503-4491-3, DOI 10.1145/2993369.2996304, Pages 329--330, [BibTeX][Abstract][Paper]
  
  
• K. Wegener, A. Kunz, L. Bochmann, T. Bänziger, Industrie 4.0 für den Maschinen- und Anlagenbau, 3. Wiener Produktionstechnik Kongress, 2016, Wien, Austria, ISBN 978-3-7003-1976-4, DOI 10.3929/ethz-a-010722924, Volume 3, Pages 29--52, [BibTeX][Abstract][Paper]
  
  
• J. Teiwes, T. Bänziger, A. Kunz, K. Wegener, Identifying the Potential of Human-Robot Collaboration in Automotive Assembly Lines using a Standardised Work Description, 22nd International Conference on Automation and Computing, 2016, Colchester, United Kingdom, ISBN 978-1-86218-132-8, DOI 10.1109/IConAC.2016.7604898, Pages 1--6, [BibTeX][Abstract][Paper]
  
  
• L. Bochmann, T. Bänziger, A. Kunz, K. Wegener, Human-Robot Collaboration in Decentralized Manufacturing Systems: An Approach for Simulation-based Evaluation of Future Intelligent Production, 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 2016, Neapel, Italy, DOI 10.1016/j.procir.2016.06.021, Volume 62, Pages 624--629, [BibTeX][Abstract][Paper]
  
  
• S. Pölzer, A. Kunz, A. Alavi, K. Miesenberger, An Accessible Environment to Integrate Blind Participants into Brainstorming Sessions, 15th International Conference on Computers Helping People with Special Needs, 2016, Linz, Austria, ISBN 978-3-319-41266-5, ISSN 0302-9743, DOI 10.1007/978-3-319-41267-2_84, Volume Lecture Notes in Computer Sciences, Issue 9759, Pages 587--593, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, M. Zank, M. Fjeld, T. Nescher, Real walking in virtual environments for factory planning and evaluation, 6th CIRP Conference on Assembly Technologies and Systems, 2016, Göteborg, Sweden, DOI 10.1016/j.procir.2016.02.086, Pages 257--262, [BibTeX][Abstract][Paper]
  
  
• T. Nescher, M. Zank, A. Kunz, Simultaneous Mapping and Redirected Walking for ad hoc Free Walking in Virtual Environments, IEEE Virtual Reality, 2016, Greenville, USA, ISBN 978-1-5090-0836-0, ISSN 2375-5334, DOI 10.1109/VR.2016.7504742, Pages 239--240, [BibTeX][Abstract][Paper]
  
  
• M. Zank, A. Kunz, Eye Tracking for Locomotion Prediction in Redirected Walking, IEEE Symposium on 3D User Interfaces, 2016, Greenville, USA, ISBN 978-1-5090-0842-1, DOI 10.1109/3DUI.2016.7460030, Pages 49--58, [BibTeX][Abstract][Paper]
  
  
• M. Zank, L. Kern, A. Kunz, Improvements on a Novel Hybrid Tracking System, Proceedings of the 7th Augmented Human International Conference 2016, 2016, Genf, Switzerland, ISBN 978-1-4503-3680-2, DOI 10.1145/2875194.2875196, Pages Article No. 22, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Kunz, M. Zank, T. Nescher, K. Wegener, Virtual reality based time and motion study with support for real walking, 49th CIRP Conference on Manufacturing Systems, 2016, Stuttgart, Germany, DOI 10.1016/j.procir.2016.11.053, Volume 57, Pages 303--308, [BibTeX][Abstract][Paper]
  
  
• M. Engeler, D. Treyer, D. Zogg, K. Wegener, A. Kunz, Condition-based Maintenance: Model vs. Statistics A Performance Comparison, 49th CIRP Conference on Manufacturing Systems, 2016, Stuttgart, Germany, DOI 10.1016/j.procir.2016.11.044, Volume 57, Pages 253--258, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, K. Wegener, Die Mensch-Maschine-Schnittstelle als Schlüsselelement für VR/AR-Anwendungen, 3. Fachkonferenz zu VR/AR-Technologien in Anwendung und Forschung an der Professur für Werkzeugmaschinen und Umformtechnik, 2015, Chemnitz, Germany, DOI 10.3929/ethz-a-010561390, Pages 17--26, [BibTeX][Abstract][Paper]
  
  
• M. Zank, A. Kunz, Using Locomotion Models for Estimating Walking Targets in Immersive Virtual Environments, International Conference on Cyberworlds, 2015, Gotland, Sweden, ISBN 978-1-4673-9403-1/15, DOI 10.1109/CW.2015.20, Pages 229--236, [BibTeX][Abstract][Paper]
  
  
• A. Yantaç, D. Çorlu, M. Fjeld, A. Kunz, Exploring Diminished Reality (DR) Spaces to Augment the Attention of Individuals with Autism, International Workshop on Diminished Reality as Challenging Issue in Mixed and Augmented Reality, 2015, Fukuoka, Japan, ISBN 978-1-4673-8471-1/15, DOI 10.1109/ISMARW.2015.21, Pages 68--73, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Alavi, A. Kunz, In-air Eyes-free Text Entry: A work in progress, Proceedings of the 4th IUI Workshop on Interacting with Smart Objects 2015, 2015, Atlanta, USA, DOI 10.3929/ethz-a-010412935, Pages 24--27, [BibTeX][Abstract][Paper][Slides]
  
  
• M. Zank, T. Nescher, A. Kunz, Tracking Human Locomotion by Relative Positional Feet Tracking, IEEE Virtual Reality 2015, 2015, Arles, France, ISSN 978-1-4799-1727-3, DOI 10.1109/VR.2015.7223423, Pages 317--318, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Kunz, D. Schnelle-Walka, A. Alavi, S. Pölzer, M. Mühlhäuser, K. Miesenberger, Making Tabletop Interaction Accessible for Blind Users, Interactive Tabletops and Surfaces, 2014, Dresden, Germany, ISBN 978-1-4503-2587-5, DOI 10.1145/2669485.2669541, Pages 327--332, [BibTeX][Abstract][Paper]
  
  
• M. Zank, A. Kunz, Cost Based Estimation of Intended Locomotion Targets Using Human Locomotion Models, 20th ACM Symposium on Virtual Reality Software and Technology, 2014, Edinburgh, United Kingdom, ISBN 978-1-4503-3253-8, DOI 10.1145/2671015.2671126, Pages 217--218, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, K. Miesenberger, Accessibility of Non-verbal Communication Introduction to the Special Thematic Session, 14th International Conference on Computers Helping People with Special Needs, 2014, Paris, France, ISBN 978-3-319-08596-8, DOI 10.1007/978-3-319-08596-8, Volume LNCS, Issue 8547, Pages 205--208, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, K. Miesenberger, M. Mühlhäuser, A. Alavi, S. Pölzer, D. Pöll, P. Heumader, D. Schnelle-Walka, Accessibility of Brainstorming Sessions for Blind People, 14th International Conference on Computers Helping People with Special Needs, 2014, Paris, France, ISBN 978-3-319-08596-8, DOI 10.1007/978-3-319-08596-8, Volume LNCS, Issue 8547, Pages 237--244, [BibTeX][Abstract][Paper][Video]
  
  
• D. Schnelle-Walka, A. Alavi, P. Ostie, M. Mühlhäuser, A. Kunz, A Mind Map for Brainstorming Sessions with Blind and Sighted Persons, 14th International Conference on Computers Helping People with Special Needs, 2014, Paris, France, ISBN 978-3-319-08596-8, DOI 10.1007/978-3-319-08596-8, Volume LNCS, Issue 8547, Pages 214--219, [BibTeX][Abstract][Paper][Video]
  
  
• T. Nescher, Y. Huang, A. Kunz, Planning Redirection Techniques for Optimal Free Walking Experience Using Model Predictive Control, IEEE 9th Symposium on 3D User Interfaces, 2014, Minneapolis, USA, DOI 10.1109/3DUI.2014.6798851, Pages 111--118, [BibTeX][Abstract][Paper][Video]
  
  
• A. Kunz, A. Alavi, P. Sinn, Integrating Pointing Gesture Detection for enhancing Brainstorming Meetings using Kinect and PixelSense, 8th International Conference on Digital Enterprise Technology, 2014, Stuttgart, Germany, DOI 10.1016/j.procir.2014.10.031, Pages 205--212, [BibTeX][Abstract][Paper]
  
  
• M. Zank, T. Nescher, A. Kunz, Robust Prediction of Auditory Step Feedback for Forward Walking, 19th ACM Symposium on Virtual Reality Software and Technology, 2013, Singapur, Singapore, ISBN 978-1-4503-2379-6, DOI 10.1145/2503713.2503735, Pages 119--122, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, A. Alavi, J. Landgren, A. Yantaç, P. Wozniak, Z. Sárosi, M. Fjeld, Tangible Tabletops for Emergency Response: An Exploratory Study, International Conference on Multimedia, Interaction, Design and Innovation, 2013, Warschau, Poland, ISBN 978-1-4503-2303-1, DOI 10.1145/2500342.2500352, Pages 1--8, [BibTeX][Abstract][Paper]
  
  
• G. Heinecke, S. Lamparter, R. Lepratti, A. Kunz, Advanced Supply Chain Information for Rule-Based Sequence Adaptions on a Mixed-Model Assembly Line with Unreliable Just-In-Sequence Deliveries, IFAC Conference on Manufacturing Modelling, Management, and Control 2013, 2013, St. Petersburg, Russian Federation, DOI 10.3182/20130619-3-RU-3018.00095, Volume 7, Pages 1902--1907, [BibTeX][Abstract][Paper]
  
  
• S. Chen, M. Chen, A. Kunz, A. Yantaç, M. Bergmark, A. Sundin, M. Fjeld, SEMarbeta: Mobile Sketch-Gesture-Video Remote Support for Car Drivers, 4th Augmented Human International Conference, 2013, Stuttgart, Germany, ISBN 978-1-4503-1904-1, DOI 10.1145/2459236.2459249, Pages 69 -- 76, [BibTeX][Abstract][Paper][Slides][Video]
  
  
• A. Kunz, K. Wegener, Towards natural user interfaces in VR/AR for Design and Manufacturing, 2. Fachkonferenz zu VR/AR-Technologien an der Professur für Werkzeugmaschinen und Umformtechnik der TU Chemnitz, 2013, Chemnitz, Germany, ISBN 978-3-942267-66-3, Pages 23--34, [BibTeX][Abstract][Paper]
  
  
• O. Schlatter, B. Migge, A. Kunz, User-aware Content Orientation on Interactive Tabletop Surfaces, 2012 International Conference on Cyberworlds, 2012, Darmstadt, Germany, ISBN 978-0-7695-4814-2/12, DOI 10.1109/CW.2012.43, Pages 246--250, [BibTeX][Abstract][Paper][Video]
  
  
• B. Migge, A. Kunz, Interaction Prediction for Content Synchronization of Net-based Shared Workspaces, 2012 International Conference on Cyberworlds, 2012, Darmstadt, Germany, ISBN 978-0-7695-4814-2/12, DOI 10.1109/CW.2012.42, Pages 241--245, [BibTeX][Abstract][Paper]
  
  
• T. Nescher, A. Kunz, Analysis of Short Term Path Prediction of Human Locomotion for Augmented and Virtual Reality Applications, 2012 International Conference on Cyberworlds, 2012, Darmstadt, Germany, ISBN 978-0-7695-4814-2/12, DOI 10.1109/CW.2012.10, Pages 15--22, [BibTeX][Abstract][Paper]
  
  
• G. Heinecke, B. Migge, A. Kunz, S. Lamparter, R. Lepratti, Measuring the performance-related effect of supply chain events on manufacturing operations, P&OM World Conference 2012, 2012, Amsterdam, Netherlands, ISBN 978-9-4916-2100-0, DOI 10.3929/ethz-a-007349852, [BibTeX][Abstract][Paper]
  
  
• A. Steinemann, J. Taiber, G. Fadel, K. Wegener, A. Kunz, Adapting Discrete-Event Simulation Tools to Support Tactical Forecasting in the Automotive Industry, Ninth International Symposium on Tools and Methods of Competitive Engineering, 2012, Karlsruhe, Germany, ISBN 978-90-5155-082-5, Pages 319--332, [BibTeX][Abstract][Paper]
  
  
• A. Steinemann, S. Wampfler, T. Kennel, A. Kunz, Definition and Analysis of a Lean Communication Theory, Ninth International Symposium on Tools and Methods of Competitive Engineering, 2012, Karlsruhe, Germany, ISBN 978-90-5155-082-5, DOI 10.3929/ethz-a-007250053, Pages 153--162, [BibTeX][Abstract][Paper]
  
  
• A. Alavi, B. Clocher, A. Smith, A. Kunz, M. Fjeld, Multi-State Device Tracking for Tangible Tabletops, SIGRAD Swedish Chapter of Eurographics, 2011, Stockholm, Sweden, ISBN 1650-3686, DOI 10.3929/ethz-a-006708514, Pages 100--104, [BibTeX][Abstract][Paper]
  
  
• A. Alavi, A. Kunz, M. Sugimoto, M. Fjeld, Dual Mode IR Position and State Transfer for Tangible Tabletops, Interactive Tabletops and Surfaces 2011 Conference, 2011, Kobe, Japan, ISBN 978-1-4503-0871-7, DOI 10.1145/2076354.2076414, Pages 278--279, [BibTeX][Abstract][Paper][Slides]
  
  
• G. Heinecke, S. Lamparter, A. Kunz, K. Wegener, R. Lepratti, Process Transparency: Effects of a Structured Read Point Selection, IFPR 21st International Conference on Production Research, 2011, Stuttgart, Germany, ISBN 978-3-8396-0293-5, DOI 10.3929/ethz-a-006612736, [BibTeX][Abstract][Paper]
  
  
• B. Migge, A. Kunz, T. Schmidt, Interaction Error Based Viewpoint Estimation for Continuous Parallax Correction on Interactive Screens, IADIS International Conference: ICT, Society and Human Beings 2011, 2011, Rome, Italy, ISBN 978-972-8939-52-6, DOI 10.3929/ethz-a-006562196, Pages 93--104, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Steinemann, S. Tschudi, A. Kunz, Full Body Haptic Display for Low-Cost Racing Car Driving Simulators, IEEE Virtual Reality 2011, 2011, Singapur, Singapore, ISBN 978-1-4577-0036-1, ISSN 1087-8270, DOI 10.1109/VR.2011.5759490, Pages 245--246, [BibTeX][Abstract][Paper]
  
  
• A. Steinemann, Y. Kellenberger, P. Peikert, A. Kunz, SAMSON: Simulation Supported Traffic Training Environment, The First International Symposium on Virtual Reality Innovations, 2011, Singapur, Singapore, ISBN 978-1-4577-0053-8, DOI 10.1109/ISVRI.2011.5759661, Pages 325--326, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, S. Dehlin, T. Piazza, M. Fjeld, T. Olofsson, Collaborative Whiteboard: Towards Remote CollaBoration and Interaction in Construction Design, 27th International Conference on Applications of IT in the ABC Industry & Accelerating BIM Research Workshop, 2010, Kairo, Egypt, DOI 10.3929/ethz-a-006219046, Pages 132--140, [BibTeX][Abstract][Paper]
  
  
• Z. Sárosi, W. Knapp, A. Kunz, K. Wegener, Evaluation of reflectivity of metal parts by a thermo-camera, Infrared Camera Applications Conference 2010, 2010, Las Vegas, USA, Pages 475--486, [BibTeX][Abstract][Paper][Slides]
  
  
• Z. Sárosi, W. Knapp, A. Kunz, K. Wegener, Detection of surface defects on sheet metal parts by using one-shot deflectometry in the infrared range, Infrared Camera Applications Conference 2010, 2010, Las Vegas, USA, Pages 243--254, [BibTeX][Abstract][Paper]
  
  
• M. Küchler, A. Kunz, CollaBoard: A Remote Collaboration Groupware Device Featuring an Embodiment-enriched Shared Workspace, ACM 2010 International Conference on Supporting Group Work, 2010, Sanibel / Florida, USA, Pages 211--214, [BibTeX][Abstract][Paper][Video]
  
  
• B. Migge, A. Kunz, User Model for Predictive Calibration Control on Interactive Screens, 2010 International Conference on Cyberworlds - Cyberworlds 2010, 2010, Singapore, Singapore, DOI 10.1109/CW.2010.18, Pages 32--37, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, T. Nescher, M. Küchler, CollaBoard: A Novel Interactive Electronic Whiteboard for Remote Collaboration with People on Content, 2010 International Conference on Cyberworlds - Cyberworldds 2010, 2010, Singapur, Singapore, DOI 10.1109/CW.2010.17, Pages 430--437, [BibTeX][Abstract][Paper]
  
  
• D. Politze, J. Bathelt, N. Jufer, A. Kunz, A Survey on Stakeholders and Requirements for a new Factory Planning Approach, NordDesign 2010, 2010, Göteborg, Sweden, Pages 447--454, [BibTeX][Abstract]
  
  
• N. Jufer, J. Daaboul, J. Bathelt, D. Politze, F. Laroche, A. Bernard, A. Kunz, Performance Factory in the Context of Mass Customization, 16th International Conference on Concurrent Enterprising, 2010, Lugano, Switzerland, [BibTeX][Abstract][Paper]
  
  
• R. Hofer, A. Kunz, Digisketch: Taming Anoto Technology on LCDs, Engineering Interactive Computing Systems 2010, 2010, Berlin, Germany, ISBN 978-1-4503-0083-4, Pages 103--108, [BibTeX][Abstract][Paper]
  
  
• F. Reichert, A. Kunz, C. Bender, R. Moryson, K. Wegener, Utilization of a Bioinformatics Algorithm for the Comparison of Process Chains, 43rd CIRP International Conference on Manufacturing Systems Sustainable Production and Logistics in Global Networks, 2010, Wien, Austria, ISBN 978-3-7083-0686-5, Pages 751--758, [BibTeX][Abstract][Paper]
  
  
• D. Politze, N. Jufer, J. Bathelt, A. Kunz, K. Wegener, AMOR – An Agent for Assisting Monitoring, Optimization and (Re-)Design in Factory Design, 43rd CIRP International Conference on Manufacturing Systems Sustainable Production and Logistics in Global Networks, 2010, Wien, Austria, ISBN 978-3-7083-0686-5, Pages 761--768, [BibTeX][Abstract][Paper]
  
  
• F. Reichert, A. Kunz, R. Moryson, K. Wegener, A Key Performance Indicator System of Process Control as a Basis for Relocation Planning, 43rd CIRP International Conference on Manufacturing Systems Sustainable Production and Logistics in Global Networks, 2010, Wien, Austria, ISBN 978-3-7083-0686-5, Pages 805--812, [BibTeX][Abstract][Paper]
  
  
• N. Jufer, D. Politze, J. Bathelt, A. Kunz, Performance Factory - A New Approach of Performance Assessment for the Factory of the Future, 7th International DAAAM Baltic Conference, 2010, Tallinn, Estonia, ISBN 978-9985-59-982-2, Pages 209--214, [BibTeX][Abstract][Paper]
  
  
• D. Politze, J. Bathelt, M. Reinhard, N. Jufer, A. Kunz, Interfacing Product Development and Factory Planning - Towards a Unified Life Cycle Management, 7th International DAAAM Baltic Conference, 2010, Tallinn, Estonia, ISBN 978-9985-59-982-2, Pages 334--339, [BibTeX][Abstract][Paper]
  
  
• J. Bathelt, D. Politze, N. Jufer, A. Jönsson, A. Kunz, Factory of the Future Enabled by the Virtual Factory Framework (VFF), 7th International DAAAM Baltic Conference, 2010, Tallinn, Estonia, ISBN 978-9985-59-982-2, Pages 203--208, [BibTeX][Abstract][Paper]
  
  
• B. Migge, T. Schmidt, A. Kunz, POMDP Models for Continuous Calibration of Interactive Surfaces, 2010 AAAI Spring Symposium, Embedded Reasoning: Intelligence in Embedded Systems, 2010, Stanford, USA, ISBN 978-1-57735-458-1, Pages 86--92, [BibTeX][Abstract][Paper][Slides]
  
  
• T. Piazza, J. Lundström, A. Kunz, M. Fjeld, Predicting Missing Markers in Real-time Optical Motion Capture, 3D Physiological Human Workshop, 2009, Zermatt, Switzerland, ISBN 978-3-642-10468-8, DOI 10.1007/978-3-642-10470-1_11, Volume Lecture Notes in Computer Science (LNCS), Issue 5903, Pages 125--136, [BibTeX][Abstract][Paper]
  
  
• R. Hofer, A. Kunz, TNT: Touch ‘n’ Tangibles on LC-Displays, 8th International Conference on Entertainment Computing - Lecture Notes in Computer Science, 2009, Paris, France, ISBN 978-3-642-04051-1, ISSN 1611-3349, Volume 5709/2009, Pages 222--227, [BibTeX][Abstract][Paper][Video]
  
  
• T. Piazza, J. Lundström, A. Hugestrand, A. Kunz, M. Fjeld, Towards Solving the Missing Marker Problem in Realtime Motion Capture, ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 2009, San Diego, USA, ISBN 978-0-7918-4899-9, DOI 10.1115/DETC2009-86517, Pages 1521--1526, [BibTeX][Abstract][Paper]
  
  
• R. Hofer, T. Nescher, A. Kunz, QualiTrack: Highspeed TUI Tracking for Tabletop Applications, Interact 2009, 2009, Uppsala, Sweden, DOI 10.1007/978-3-642-03658-3_38, Volume LNCS 5727, Issue II, Pages 332--335, [BibTeX][Abstract][Paper][Video]
  
  
• I. Habib, N. Berggren, E. Rehn, G. Josefsson, A. Kunz, M. Fjeld, DGTS: Integrated Typing and Pointing, Interact 2009, 2009, Uppsala, Sweden, DOI 10.1007/978-3-642-03658-3_30, Volume LNCS 5727, Issue II, Pages 232--235, [BibTeX][Abstract][Paper][Video]
  
  
• N. Jufer, J. Bathelt, A. Kunz, M. Dürst, Product and Production Configuration Method – enhancing the customer driven value chain by the cognitive dimension, International Conference on Concurrent Enterprising, 2009, Leiden, Netherlands, [BibTeX][Abstract][Paper][Slides]
  
  
• R. Hofer, D. Naeff, A. Kunz, FLATIR: FTIR Multi-touch Detection on a Discrete Distributed Sensor Array, Tangible and Embedded Interfaces (TEI) 2009, 2009, Cambridge, United Kingdom, ISBN 978-1-60558-493-5, DOI 10.1145/1517664.1517730, Pages 317--322, [BibTeX][Abstract][Paper][Video]
  
  
• F. Reichert, A. Kunz, R. Moryson, MAE-P3 – A System to Gain Transparency of Production Structure as a Basis for Production Relocation Planning, Nineteenth International Conference on Systems Engineering (ICSENG 2008), 2008, Las Vegas, USA, ISBN 987-0-7695-3331-5, DOI 10.1109/ICSEng.2008.55, Pages 458--463, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Kunz, IT-unterstützte Kreativprozesse, VR/AR-Technologien für die Produktion, 2008, Chemnitz, Germany, ISBN 978-300-024677-7, DOI 10.3929/ethz-a-006039151, Pages 15--22, [BibTeX][Abstract][Paper]
  
  
• R. Hofer, A. Kunz, P. Kaplan, MightyTrace: Multiuser Tracking Technology on LC-displays, Proceeding of the twenty-sixth annual SIGCHI conference on Human factors in computing systems, 2008, Florence, Italy, ISBN 978-1-60558-011-1, DOI 10.3929/ethz-a-005705488, Pages 215--218, [BibTeX][Abstract][Paper]
  
  
• C. Ganser Schwab, A. Steinemann, R. Hofer, A. Kunz, InfrActables: Supporting Collocated Group Work by Combining Pen-Based and Tangible Interaction, Proceedings of Tabletop 2007, 2007, Newport, Rhode Island, USA, DOI 10.3929/ethz-a-005705337, [BibTeX][Abstract][Paper][Video]
  
  
• R. Hofer, C. Ganser Schwab, A. Kunz, MatrixView: Extending Immersion in Video Conferencing, Adjunct Proceedings of the 19th Annual ACM Symposium on User Interface Software and Technology (UIST) 2006, Montreux, Switzerland, October 15-18, 2006, 2006, Montreux, Switzerland, DOI 10.3929/ethz-a-005713962, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, G. Fadel, J. Taiber, M. Schichtel, Towards Collaboration in Engineering of Tomorrow - Building Highly Interactive Virtual Collaboration Platforms, SAE 2006 World Congress & Exhibition, 2006, Detroit, Mich., USA, [BibTeX][Abstract][Paper]
  
  
• C. Ganser Schwab, A. Steinemann, A. Kunz, InfrActables: Multi-User Tracking System for Interactive Surfaces, Proceedings of the IEEE conference on Virtual Reality (IEEE VR 2006), 2006, Alexandria, Virginia, USA, ISBN 1-4244-0224-7, DOI 10.1109/vr.2006.86, Pages 253--256, [BibTeX][Abstract][Paper]
  
  
• M. Küchler, A. Kunz, HoloPort – A Device for Simultaneous Video and Data Conferencing Featuring Gaze Awareness, Proceedings of the IEEE conference on Virtual Reality (IEEE VR 2006), 2006, Alexandria, Virginia, USA, ISSN 1087-8270, DOI 10.1109/vr.2006.71, Pages 81--87, [BibTeX][Abstract][Paper]
  
  
• R. Zhang, A. Kunz, P. Lochmatter, G. Kovacs, Dielectric Elastomer Spring Roll Actuators for a Portable Force Feedback Device, 14th Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems 2006, 2006, Alexandria, Virginia, USA, ISBN 1-4244-0226-3, DOI 10.1109/HAPTIC.2006.1627137, Pages 347--353, [BibTeX][Abstract][Paper]
  
  
• R. Zhang, A. Kunz, P. Lochmatter, G. Kovacs, Spring Roll Dielectric Elastomer Actuators for a Portable Force Feedback Glove, Proceeding of SPIE 2006 - Electroactive Polymer Actuators and Devices (EAPAD), 2006, San Diego, California, USA, ISBN 9780819462213, DOI 10.1117/12.658524, Volume 6168, Pages 505--516, [BibTeX][Abstract][Paper]
  
  
• R. Hofer, C. Ganser Schwab, A. Kunz, Tracking Technology for Multiple Device Interaction, 18th Annual ACM Symposium on User Interface Software and Technology, 2005, Seattle, Washington, USA, DOI 10.3929/ethz-a-005746141, [BibTeX][Abstract][Paper][Slides]
  
  
• C. Ganser Schwab, T. Kennel, A. Kunz, N. Birkeland, Computer Supported Environment for Creativity Processes in Globally Distributed Teams, Proceedings of ICED 2005, 2005, Sydney, Australia, ISBN 1-904670-00-8, DOI 10.3929/ethz-a-006039179, Pages 109--110, [BibTeX][Abstract][Paper]
  
  
• A. Mazzone, A. Kunz, Sketching the Future of the SmartMesh Wide Area Haptic Feedback Device by Introducing the Controlling Concept for such a Deformable Multi-Loop Mechanism, WorldHaptics - First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, 2005, Pisa, Italy, ISBN 0-7695-2310-2, DOI 10.1109/WHC.2005.116, Pages 308--315, [BibTeX][Abstract][Paper]
  
  
• M. Küchler, A. Kunz, Imperceptible Projection Blanking for Reliable Segmentation within Mixed Reality Applications, 9th Int. Workshop on Immersive Projection Technology, 11th Eurographics Workshop on Virtual Environments, 2005, Aalborg, Denmark, ISBN 3-905673-21-5, ISSN 1727-530X, DOI 10.2312/EGVE/IPT_EGVE2005/023-030, Pages 23--30, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, R. Moryson, Minimierung der Prozesskette in der Grobplanungsphase der Produktionsplanung, 15. Symposium Design for X, 2004, Neukirchen, Germany, ISBN 3-9808539-2-6, DOI 10.3929/ethz-a-006039229, Pages 65--75, [BibTeX][Abstract][Paper]
  
  
• A. Mazzone, C. Spagno, A. Kunz, Morphing the SmartMesh: Proposing a Novel Control Architecture, Eurohaptics 2004, 2004, Munich, Germany, Pages 467--472, [BibTeX][Abstract][Paper]
  
  
• R. Zhang, A. Kunz, A. Mazzone, S. Michel, G. Kovacs, Dielectric Elastomer Actuators for A Portable Force Feedback Device, 4th International Conference Eurohaptics 2004, 2004, München, Germany, ISBN 3980961400, DOI 10.3929/ethz-a-010090533, Pages 300--307, [BibTeX][Abstract][Paper]
  
  
• A. Mazzone, C. Spagno, A. Kunz, The HoverMesh: A Deformable Structure Based on Vacuum Cells, Proceedings of the 2004 ACM SIGCHI International Conference on Advances in computer entertainment technology, 2004, Singapore, ISBN 1-58113-882-2, DOI 10.1145/1067343.1067366, Pages 187--193, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, R. Moryson, CAPP-basierter Assistent für Digitale Fabrik Tools innerhalb des Produktentstehungsprozesses, 14. Symposium Design for X, 2003, Neukirchen, Germany, ISBN 3-9808539-1-8, DOI 10.3929/ethz-a-006039256, Pages 11--24, [BibTeX][Abstract][Paper]
  
  
• A. Mazzone, R. Zhang, A. Kunz, Novel Actuators for Haptic Displays based on Electroactive Polymers, Proceedings of the ACM symposium on Virtual reality software and technology 2003, 2003, Osaka, Japan, ISBN 1-58113-569-6, DOI 10.1145/1008653.1008688, Pages 196--204, [BibTeX][Abstract][Paper]
  
  
• A. Mazzone, C. Spagno, A. Kunz, A Haptic Feedback Device based on an Active Mesh, Proceedings of the ACM symposium on Virtual reality software and technology 2003, 2003, Osaka, Japan, ISBN 1-58113-569-6, DOI 10.1145/1008653.1008687, Pages 188--195, [BibTeX][Abstract][Paper]
  
  
• J. Bathelt, A. Jönsson, A. Kunz, C. Bacs, M. Meier, Conceptual Design Approach for Mechatronic Systems Controlled by a Programmable Logic Controller (PLC), 14th International Conference on Engineering Design 2003, 2003, Stockholm, Sweden, ISBN 1-904670-00-8, DOI 10.3929/ethz-a-010090693, Pages 497--498, [BibTeX][Paper]
  
  
• M. Gross, S. Würmlin, M. Naef, E. Lamboray, C. Spagno, A. Kunz, E. Koller-Meier, T. Svoboda, L. Van Gool, S. Lang, K. Strehlke, A. VandeMoere, O. Staadt, blue-c: A Spatially Immersive Display and 3D Video Portal for Telepresence, Proceedings of ACM SIGGRAPH 2003, 2003, San Diego, California, USA, ISBN 1-58113-709-5, DOI 10.1145/882262.882350, Volume 2, Issue 3, Pages 819--827, [BibTeX][Abstract][Paper]
  
  
• A. Mazzone, C. Spagno, A. Kunz, R. Zhang, SmartMesh: A Smart Structure for Object Creation, Eurohaptics 2003, 2003, Dublin, Ireland, DOI 10.3929/ethz-a-006039128, Pages 451--455, [BibTeX][Abstract][Paper]
  
  
• C. Spagno, A. Kunz, Construction of a Three-Sided Immersive Telecollaboration System, Proceeding of the IEEE Virtual Reality Conference 2003, 2003, Los Angeles, California, USA, ISBN 0-7695-1882-6, ISSN 1087-8270, DOI 10.1109/vr.2003.1191119, Pages 37--44, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, C. Spagno, VR zur Unterstützung des kollaborativen Arbeitens, 13. Symposium Design for X 2002, 2002, Neukirchen, Germany, ISBN 3-9808539-0-X, DOI 10.3929/ethz-a-006039290, Pages 109--116, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, S. Müller, Tool zur effizienten Durchführung einer FMEA-Sitzung, 13. Symposium Design for X 2002, 2002, Neukirchen, Germany, ISBN 3-9808539-0-X, DOI 10.3929/ethz-a-006039295, Pages 171--178, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, S. Müller, IT-Unterstützung für die Metaplantechnik, 13. Symposium Design for X 2002, 2002, Neukirchen, Germany, ISBN 3-9808539-0-X, DOI 10.3929/ethz-a-006039389, Pages 199--206, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, T. Kennel, A. Mazzone, S. Müller, Workplace to Support the Teamwork in the Early Stages of the Product Development Process, Proceedings of Virtual Concept 2002, 2002, Biarritz, France, ISBN 2-9514772-2-8, DOI 10.3929/ethz-a-006039406, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, T. Kennel, U. Hugentobler, Development of a Digital Lectern for Teleteaching, ASME Design Engineering Technical Conferences (DETC) and Computers and Information in Engineering Conference (CIE) 2002, 2002, Montreal, Canada, DOI 10.1115/DETC2002/CIE-34414, [BibTeX][Abstract][Paper][Slides]
  
  
• A. Kunz, T. Kennel, M. Meier, Ein neues Präsentationstool für die Lehre, 47. Internationales Wissenschaftliches Kolloquium IWK, 2002, Ilmenau, Germany, ISBN 0943-7207, DOI 10.3929/ethz-a-006042039, Pages 606--607, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, C. Spagno, Technical System for Collaborative Work, Eurographics Workshop on Virtual Environments 2002, 2002, Barcelona, Spain, ISBN 1-58113-535-1, DOI 10.3929/ethz-a-006050425, Pages 73--80, [BibTeX][Abstract][Paper]
  
  
• A. Breiing, A. Kunz, Critical Consideration and Improvement of the FMEA, Tools and methods of competitive engineering - TMCE 2002, 2002, Wuhan, China, ISBN 7-5609-2682-7, DOI 10.3929/ethz-a-006042074, Pages 519--530, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, C. Spagno, Simultaneous Projection and Picture Acquisition for a Distributed Collaborative Environment, Proceedings of the IEEE Virtual Reality 2002 Conference, 2002, Orlando, Florida, USA, ISBN 0-7695-1492-8, DOI 10.1109/vr.2002.996538, Pages 279--280, [BibTeX][Abstract][Paper]
  
  
• A. Breiing, A. Kunz, Kritische Betrachtunng und Verbesserung der FMEA, 12. Symposium Design for X 2001, 2001, Neukirchen, Germany, ISBN 3-00-008364-2, DOI 10.3929/ethz-a-006042119, Pages 15--20, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, S. Müller, T. Kennel, K. Lauche, K. Mbiti, Supporting the Teamwork by New Means of the Information Technology, International Conference on Engineering Design ICED 2001, 2001, Glasgow, United Kingdom, ISBN 1-86058-355-5, DOI 10.3929/ethz-a-006042141, Pages 425--432, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, M. Meier, Innovation at the Digital Product - the Use of Virtual Reality in Product Development Processes, International Conference on Engineering Design ICED 2001, 2001, Glasgow, United Kingdom, ISBN 1-86058-354-7, DOI 10.3929/ethz-a-006042186, Pages 693--700, [BibTeX][Abstract][Paper]
  
  
• T. Kennel, A. Kunz, S. Müller, Innoplan - An Adaptation of the Metaplantechnique for a Novel Computer Supported Method of Teamwork, International Conference on Engineering Design ICED 2001, 2001, Glasgow, United Kingdom, ISBN 1-86058-354-7, DOI 10.3929/ethz-a-006042219, Pages 387--394, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, C. Spagno, Novel Shutter Glass Control for Simultaneous Projection and Picture Acquisition, Immersive Projection Technology and Virtual Environments 2001, 2001, Stuttgart, Germany, ISBN 3-211-83671-3, DOI 10.1007/978-3-7091-6221-7_26, Pages 257--266, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, C. Spagno, Modified Shutter Glasses for Projection and Picture Acquisition in Virtual Environments, Proceedings of the IEEE Virtual Reality 2001 Conference, 2001, Yokohama, Japan, ISBN 0-7695-0948-7, DOI 10.1109/vr.2001.913797, Pages 281--282, [BibTeX][Abstract][Paper]
  
  
• O. Staadt, M. Gross, A. Kunz, M. Meier, The Blue-C: Integrating Real Humans into a Networked Immersive Environment, Proceedings of the third international conference on Collaborative virtual environments, 2000, San Francisco, CA, USA, ISBN 1-58113-303-0, DOI 10.3929/ethz-a-005792478, Pages 201--202, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, A. Burri, Design and Construction of a new haptic interface, ASME Design Eingineering Technical Conferences (DETC) and Computers and Information in Engineering Conference (CIE) 2000, 2000, Baltimore, USA, DOI 10.3929/ethz-b-000082630, Pages 497--502, [BibTeX][Abstract][Paper]
  
  
• O. Niedermann, S. Keller, A. Kunz, M. Meier, Einsatz der Informationstechnologie in der FMEA, Proceedings of The FMEA Benutzertreffen, 1999, Fürth, Germany, DOI 10.3929/ethz-a-010107573, [BibTeX][Abstract][Paper]
  
  
• W. Elspass, A. Kunz, Portable haptic interface with active functinal design, Proceedings of SPIE, the International Society for Optical Engineering, 1999, San Francisco, CA, USA, ISSN 0277-786X, DOI 10.1117/12.350767, Volume 3668, Issue 2, Pages 926--932, [BibTeX][Abstract][Paper]
  
  

Journals

• E. Andreopoulos, V. Gorobets, A. Kunz, Automatic MTM-Transcription in Virtual Reality Using the Digital Twin of a Workplace, The International Journal of Advanced Manufacturing Technology, 2022, DOI 10.21203/rs.3.rs-2110194/v1, [BibTeX][Abstract][Paper]
  
  
• Y. Rothacher, A. Nguyen Thi, E. Efthymiou, E. Werth, C. Baumann, B. Lenggenhager, P. Brugger, A. Kunz, L. Imbach, Dissociation of motor control from motor awareness in awake sleepwalkers: An EEG study in virtual reality, CORTEX, 2022, DOI 10.1016/j.cortex.2021.12.016, Volume 149, Pages 165--172, [BibTeX][Abstract][Paper]
  
  
• V. Gorobets, V. Holzwarth, C. Hirt, N. Jufer, A. Kunz, A VR-based Approach in Conducting MTM for Manual Workplaces, The International Journal of Advanced Manufacturing Technology, 2021, Moscow, Russian Federation, ISSN 0268-3768, DOI 10.1007/s00170-021-07260-7, Pages 2501--2510, [BibTeX][Abstract][Paper]
  
  
• V. Holzwarth, J. Schneider, J. Handali, J. Gisler, C. Hirt, A. Kunz, J. vomBrocke, Towards estimating affective states in Virtual Reality based on behavioral data, Springer Virtual Reality - Special Issue "Virtual Reality and Cognitive Sciences", 2021, DOI 10.1007/s10055-021-00518-1, Volume 25, Issue 4, Pages 1139--1152, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, M. Spahni, Y. Kompis, D. Jetter, A. Kunz, Virtual Reality Training Platform for a Computer Numerically Controlled Grinding Machine Tool, International Journal of Mechatronics and Manufacturing Systems, 2020, ISSN 1753-1039, DOI 10.1504/IJMMS.2021.115460, Volume 14, Issue 1, Pages 1--17, [BibTeX][Abstract][Paper]
  
  
• C. Hirt, M. Eckard, A. Kunz, Stress Generation and Non-intrusive Measurement in Virtual Environments Using Eye Tracking, Journal of Ambient Intelligence and Humanized Computing, 2020, Germany, ISSN 18685137, DOI 10.1007/s12652-020-01845-y, Pages 5977 -- 5989, [BibTeX][Abstract][Paper]
  
  
• Y. Rothacher, A. Nguyen Thi, B. Lenggenhager, A. Kunz, P. Brugger, Walking through virtual mazes: Spontaneous alternation behaviour in human adults, Cortex, 2020, DOI 10.1016/j.cortex.2020.01.018, Pages 1--16, [BibTeX][Abstract][Paper]
  
  
• R. Lorenz, T. Netland, P. Roh, V. Holzwarth, A. Kunz, K. Wegener, Data-driven productivity improvement in machinery supply chains, International Journal of Mechatronics and Manufacturing Systems, 2019, DOI 10.1504/IJMMS.2019.103483, Volume 12, Issue 3/4, Pages 255--271, [BibTeX][Abstract][Paper]
  
  
• P. Roh, A. Kunz, K. Wegener, Information Stream Mapping: Mapping, analysing and improving the efficiency of information streams in manufacturing value streams, CIRP Journal of Manufacturing Science and Technology, 2019, Paris, France, ISSN 1755-5817, DOI https://doi.org/10.1016/j.cirpj.2019.04.004, Volume 25, Pages 1--13, [BibTeX][Abstract][Paper]
  
  
• M. Siegrist, C. Ung, M. Zank, M. Marinello, A. Kunz, C. Hartmann, M. Menozzi, Consumers' food selection behaviors in three-dimensional (3D) virtual reality, Food Research International, 2019, DOI 10.1016/j.foodres.2018.02.033, Volume 117, Pages 50--59, [BibTeX][Abstract][Paper][Video]
  
  
• Y. Rothacher, A. Nguyen Thi, B. Lenggenhager, A. Kunz, P. Brugger, Visual capture of gait during redirected walking, Springer Nature Scientific Reports, 2018, DOI 10.1038/s41598-018-36035-6, Pages 8:17974, [BibTeX][Abstract][Paper]
  
  
• T. Bänziger, A. Kunz, K. Wegener, Optimizing Human-Robot Task Allocation using a Simulation Tool based on Standardized Work Descriptions, Journal of Intelligent Manufacturing, 2018, ISBN 0956-5515, ISSN 1572-8145, DOI 10.1007/s10845-018-1411-1, Pages 1635--1648, [BibTeX][Abstract][Paper]
  
  
• M. Zank, A. Kunz, Where are you going? Using human locomotion models for target estimation, The Visual Computer - International Journal of Computer Graphics, 2016, Springer, Germany, ISBN 0178-2789, ISSN 1432-2315, DOI 10.1007/s00371-016-1229-9, Volume 32, Issue 10, Pages 1323--1335, [BibTeX][Abstract][Paper]
  
  
• M. Zank, T. Nescher, A. Kunz, Predicting audio step feedback for real walking in virtual environments, Computer Animation and Virtual Worlds, 2015, ISSN 1546-427X, DOI 10.1002/cav.1611, Volume 26, Issue 6, Pages 537--547, [BibTeX][Abstract][Paper]
  
  
• A. Alavi, A. Kunz, Tracking Deictic Gestures over Large Interactive Surfaces, Computer Supported Cooperative Work, 2015, JCSCW, Germany, ISBN 0925-9724, ISSN 1573-7551, DOI 10.1007/s10606-015-9219-4, Volume 24, Issue 2, Pages 109-119, [BibTeX][Abstract][Paper]
  
  
• A. Steinemann, J. Taiber, G. Fadel, K. Wegener, A. Kunz, Adapting Discrete-event Simulation Tools to Support Tactical Forecasting in the Automotive Industry, International Journal of CoCreation in Design and the Arts, 2013, ISBN 1571-0882, ISSN 1745-3755, DOI 10.1080/15710882.2013.824484, Volume 9, Issue 3, Pages 159--177, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, A. Alavi, M. Fjeld, Multistatus Interaktionsgeräte für interaktive Tische, i-com: Zeitschrift für interaktive und kooperative Medien, 2013, München, Germany, ISSN 1618-162X, DOI 10.1524/icom.2013.0006, Volume 12, Issue 1, Pages 39--44, [BibTeX][Abstract][Paper]
  
  
• A. Alavi, M. Fjeld, A. Kunz, Dual-channel Technology for Detecting Multi-state Devices on Tabletops, International Journal of Soft Computing and Software Engineering, 2013, ISSN 2251-7545, Pages to be published, [BibTeX][Abstract]
  
  
• T. Nescher, A. Kunz, Using Head Tracking Data for Robust Short Term Path Prediction of Human Locomotion, Transactions on Computational Science, 2013, ISSN 0302-9743, DOI 10.1007/978-3-642-38803-3_10, Volume XVIII, Pages 172--191, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, Collaborative Environments in the Product Ideation Phase, Advances in Computers and Information in Engineering, 2013, Pages to appear, [BibTeX]
  
  
• N. Jufer, D. Politze, J. Bathelt, A. Kunz, Performance Factory - A New Approach of Performance Assessment for the Factory of the Future, Estonian Journal of Engineering, 2012, Tallinn, Estonia, ISBN 1736-6038, ISSN 1736-7522, DOI 10.3176/eng.2012.1.04, Volume 18, Issue 1, Pages 42--57, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, T. Nescher, Future Entertainment Technologies, ACM Computers in Entertainment, 2011, ISSN 1544-3574, DOI 10.1145/2027456.2027457, Volume 9, Issue 3, Pages 11.1--11.4, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, Human-Computer Interaction on Tabletops, The SBC Journal on 3D Interactive Systems, 2011, Porto Alegre, Brazil, ISSN 2236-3297, DOI 10.3929/ethz-a-006699449, Volume 2, Issue 2, Pages 44--47, [BibTeX][Abstract][Paper]
  
  
• T. Nescher, A. Kunz, An interactive whiteboard for immersive telecollaboration, The Visual Computer: International Journal of Computer Graphics, 2011, ISSN 0178-2789, DOI 10.1007/s00371-011-0546-2, Volume 27, Issue 4, Pages 311--320, [BibTeX][Abstract][Paper]
  
  
• E. Constanza, A. Kunz, M. Fjeld, Mixed Reality: A Survey, Lecture Notes in Computer Science - Human Machine Interaction - Research Results of the MMI Program, 2009, Berlin / Heidelberg, Germany, ISBN 978-3-642-00436-0, DOI 10.1007/978-3-642-00437-7_3, Volume 5440, Pages 47--68, [BibTeX][Abstract][Paper]
  
  
• C. Ganser Schwab, T. Kennel, A. Kunz, Digital support for net-based teamwork in early design stages, Journal of Design Research, 2007, USA, ISSN 1748-3050, DOI 10.1504/JDR.2007.015567, Volume 6, Issue 1/2, Pages 150--168, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, T. Kennel, A. Mazzone, S. Müller, Workplace to support the teamwork in the early stages of the product development process, Mécanique et Industries, 2004, Switzerland, ISSN 1296-2139, DOI 10.1051/meca:2004019, Volume 5, Issue 2, Pages 181--187, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, C. Spagno, Construction of a three-sided immersive telecollaboration system, Presence: Teleoperators & Virtual Environments, 2004, USA, ISSN 1054-7460, DOI 10.1162/1054746041382410, Volume 13, Issue 2, Pages 178--192, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, S. Müller, Einsatz der Informationstechnologie in der FMEA, Konstruktion - Zeitschrift für Produktentwicklung, 2000, ISBN 0005-5953, DOI 10.3929/ethz-a-006054820, Volume 52, Issue 9, Pages 67--70, [BibTeX][Abstract][Paper]
  
  

Books

• M. Popa, A. Kunz, T. Kennel, M. Precup, G. Contiu, Inovative si Procese Creative de Productie – Innovative Technologien und Kreative Produktionsprozesse, 2008, ISBN 978-973-662-421-6, [BibTeX][Paper]
  
  
• D. Filipoiu, A. Kunz, M. Meier, S. Müller, Technology and Technology Tools, 2003, ISBN 973-652-662-3, [BibTeX]
  
  

Book chapter

• L. Clack, C. Hirt, A. Kunz, H. Sax, Experiential Training of Hand Hygiene Using Virtual Reality, Recent Advances in Technologies for Inclusive Well-Being, 2021, ISBN 978-3-030-59607-1, DOI 10.1007/978-3-030-59608-8_3, Volume 196, Pages 31--42, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, Der Einsatz der virtuellen Realität zur digitalen Planung von Produktionsprozessen, Virtual Reality und Augmented Reality in der Digitalen Produktion, 2020, ISBN 978-3-658-29008-5, ISSN 978-3-658-29009-2, DOI 10.1007/978-3-658-29009-2_11, Pages 217--236, [BibTeX][Abstract][Paper]
  
  
• G. Heinecke, J. Köber, R. Lepratti, S. Lamparter, A. Kunz, Event-Driven Order Rescheduling Model for Just-In-Sequence Deliveries to a Mixed-Model Assembly Line, Advances in Production Management Systems. Competitive Manufacturing for Innovative Products and Services, Part I, 2013, ISSN 1868-4238, DOI 10.1007/978-3-642-40352-1_41, Volume 397, Pages 326--333, [BibTeX][Abstract][Paper]
  
  
• G. Heinecke, J. Köber, A. Kunz, S. Lamparter, Modeling the basic cause-effect relationship between supply chain events and performance, Lecture Notes in Logistics: Dynamics in Logistics, 2013, ISBN 978-3642359651, ISSN 2194-8917, DOI 10.1007/978-3-642-35966-8_13, Pages 163--174, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, M. Fjeld, From Table–System to Tabletop: Integrating Technology into Interactive Surfaces, Tabletops - Horizontal Interactive Displays, 2010, ISBN 978-1-84996-112-7, Volume Human-Computer Interaction Series, Issue Tabletops - Horizontal Interactive Displays, Pages 53--72, [BibTeX][Abstract][Paper]
  
  
• R. Zhang, P. Lochmatteer, G. Kovacs, A. Kunz, F. Conti, Portable force feedback device based on miniature rolled dielectric elastomer actuators, Dielectric Elastomers as Electromechanical Transducers, 2008, ISBN 978-0-08-047488-5, DOI 10.1016/B978-0-08-047488-5.00020-4, Pages 207--216, [BibTeX][Abstract][Paper]
  
  

Dissertations

• A. Kunz, Interaktion mit dem digitalen Produktmodell im virtuellen Raum, 2004, Diss-Nr. Habilitationsschrift, [BibTeX][Abstract]
  Supervisors: M. Meier
  
  
• A. Kunz, Charakterisierung und Beeinflussung der multifunktionalen Eigenschaften von Konstruktionswerkstoffen, 1998, Diss-Nr. 12756, [BibTeX][Abstract]
  Supervisors: M. Meier
  
  

Press articles

• A. Kunz, Forschung und Innovation in der Schweiz - Mixed Reality, SATW - Ein technologisches Panorama 2022, 2022, [PDF]
  
  
• A. Kunz, D. Schmid, Digitaler Zwilling, SATW Technology Outlook 2021, 2021, [PDF]
  
  
• A. Kunz, Augmented Reality, SATW Technology Outlook 2021, 2021, [PDF]
  
  
• M. Fischer, F. Lipp, J. Gisler, V. Holzwarth, A. Kunz, Virtuell Rohre verbinden, planer installatuer, 2020, [PDF]
  
  
• M. Fischer, J. Gisler, V. Holzwarth, A. Kunz, Rohrverbindungstechnik mit VR, Gebäudetechnik, 2020, [PDF]
  
  
• A. Kunz, Augmented Reality – Industrielle Anwendungen, SATW Schweizerische Akademie der Technischen Wissenschaften, 2020
  
  
• A. Kunz, Augmented Reality – Industrielle Anwendungen, SATW Schweizerische Akademie der Technischen Wissenschaften, 2019, [PDF]
  
  
• A. Kunz, C. Hirt, Virtual Reality in der Produktionsplanung, Wirtschaftszeit, 2018, [PDF]
  
  
• K. Wegener, A. Kunz, L. Weiss, Industrie 4.0 in der Zerspanung, Maschinenbau, 2017, [PDF]
  
  
• A. Kunz, MEM-Branche ist sehr stark an Virtual Reality interessiert, Technische Rundschau, 2017, [PDF]
  
  
• T. Nescher, M. Zank, A. Kunz, Virtuelle Realität - Eine Tür zu neuen Welten, Baublatt, 2014, [PDF]
  
  
• G. Heinecke, A. Kunz, K. Wegener, Ein Frühwarnsystem für die Fahrzeugproduktion – Verfolgungsdaten vermeiden Nacharbeit, Schweizer Logistikkatalog, 2014, [PDF]
  
  
• T. Nescher, A. Kunz, Virtual room in the cellar, ETH News, 2014, [PDF]
  
  
• T. Nescher, A. Kunz, Der virtuelle Raum im Keller, ETH News, 2014, [PDF]
  
  
• B. Migge, A. Kunz, Gegen den Ärger am Billettautomaten, ETH Life, 2013, [PDF]
  
  
• L. Winstedt,, A. Kunz, Workshop around the interaction between the digital and the physical gathers researchers and students, Chalmers News, 2011, [PDF]
  
  
• M. Schmid, A. Kunz, S. Wigger, Tools course in CAM, ‘From CAD to the part’, MTTRF, 2011, [PDF]
  
  
• A. Kunz, Neue Interaktionsmöglichkeiten bei Videokonferenzen - Gleichzeitige Darstellung von Teilnehmern und Inhalten, Bulletin - Fachzeitschrift und Verbandsinformationen von electrosuisse und VSEAES, 2010, [PDF]
  
  
• A. Kunz, S. Betschon, Die reale Welt als Benutzerschnittstelle - Berührbare Oberflächen sollen die Bedienung des Computers vereinfachen, Neue Zürcher Zeitung, 2009, [PDF]
  
  
• T. Lorenzer, A. Kunz, K. Wegener, A máquina enxuta reduz tempos a aumenta a flexibilidade, MM - Máquinas e Matais, 2008
  
  
• T. Lorenzer, A. Kunz, K. Wegener, Umrüstbarkeit macht flexibel, WB Werkstatt + Betrieb, 2007
  
  
• A. Kunz, T. Lorenzer, K. Wegener, Rekonfigurierbare Werkzeugmaschine als Produktionsmittel der Zukunft, Werkstatt und Betrieb, 2007, [PDF]
  
  
• A. Kunz, A. Jönsson, IT-Wildwuchs erschwert Produktentstehung, Computer Zeitung, 2007, [PDF]
  
  

Talks

• W. Züllig, A. Kunz, Virtual Reality in der Arbeitsplatzgestaltung, 37. Zürcher Logistik-Kolloquium, 2022, Zürich, Switzerland, [PDF]
  
  
• A. Kunz, Spatial Orientation in Virtual Environments - How Real is Virtual Reality?, Expert Workshop: Spatial Orientation In Virtual Environments, 2021, virtual, [PDF]
  
  
• C. Hirt, A. Kunz, Pushing the Frontier of VR Research, Guest Lecture in Special Lecture Series, 2020, Bergen, Norway
  
  
• C. Hirt, M. Eckard, A. Kunz, Mental Stress in Virtual Reality, BSc Lecture: Human Computer Interaction, 2020, Bergen, Norway
  
  
• A. Kunz, Virtual Reality: Ein beutzerorientiertes System für industrielle Geschäftsprozesse, Workshop Advantage Austria, 2018, Zürich, Switzerland
  
  
• A. Kunz, Virtuelle Realität für die Produktentwicklung, NTB Technologietag 2018, 2018, Buchs, Switzerland
  
  
• Y. Rothacher, A. Nguyen Thi, B. Lenggenhager, A. Kunz, P. Brugger, Visual Capture of Gait in Redirected Walking, European Workshop on Cognitive Neuropsychology 2018, 2018, Bressanone, Italy, [PDF]
  
  
• P. Roh, A. Kunz, W. Züllig, Der digitale Schatten der Produktion:Basis zur Nutzung von «Industrie 4.0», F&E Konferenz zur Industrie 4.0, 2018, Brugg / FHNW Windisch, Switzerland
  
  
• A. Kunz, Die Zukunft der Zusammenarbeit in Unternehmen, AVS Collaboration Days 2017, 2017, Hünenberg, Switzerland, [PDF]
  
  
• A. Kunz, Virtual Reality in der Produktionsplanung: Die virtuelle MTM, 34. Zürcher Logistik-Kolloquium, 2017, Zürich, Switzerland, [PDF]
  
  
• K. Wegener, A. Kunz, Industrie 4.0: Szenarien in Vision und Umsetzung, Innovationsforum Industrie, 2016, Zürich, Switzerland
  
  
• A. Kunz, K. Wegener, Industrie 4.0 / Werkplatz 2025, Jahrestreffen Industrieverband Solothurn und Umgebung, 2016, Schloss Waldegg, Switzerland
  
  
• K. Wegener, A. Kunz, Der Hype vergeht, Industrie 4.0 bleibt, 33. Zürcher Jubiläums Logistik-Kolloquium, 2016, Zürich, Switzerland
  
  
• K. Wegener, A. Kunz, Werkplatz 4.0 – Ein Bündel voller Chancen, Alu Kongress, 2016, Ittingen, Switzerland
  
  
• A. Kunz, Echtes Begehen virtueller Gebäude, Digital Real Estate Summit 2016, 2016, Windisch, Switzerland, [PDF]
  
  
• A. Kunz, T. Nescher, M. Zank, VR Activities at ICVR, VR Workshop Greater Zurich-area VR Community, 2016, Zurich, Switzerland
  
  
• A. Kunz, Industrial Internet - Activities at IWF / ETH Zurich, F&E-Konferenz zur Industrie 4.0, 2016, Brugg-Windisch, Switzerland
  
  
• A. Kunz, K. Wegener, Industrie 4.0 - Auch für die Schweiz?, Arbeitgeberanlass Mittelthurgau, 2015, Kradolf, Switzerland
  
  
• A. Kunz, K. Wegener, Industrie 4.0 / Werkplatz 2025 aus Sicht der Forschung, Swissmem ERFA-Gruppe, 2015, Küssnacht, Switzerland
  
  
• K. Wegener, G. Nagel, A. Kunz, Industrie 4.0 für den Maschinen- und Anlagenbau, Bühler I4.0 Tag, 2015, Uzwil, Switzerland
  
  
• K. Wegener, G. Nagel, A. Kunz, Ein Bündel voller Chancen – Industrie 4.0, Ostschweizer Technologiesymposium 2015, 2015, St. Gallen, Switzerland
  
  
• K. Wegener, A. Kunz, G. Nagel, Industrie 4.0 – woher – wohin – warum, 15. Helbling Bankensymposium, 2015, Switzerland
  
  
• A. Kunz, Teamarbeit von morgen, Festveranstaltung Acél & Partner, 2011, Zürich, Switzerland
  
  
• A. Kunz, VR/AR unterstützt die Teamarbeit, Eröffnung des VR-Technikums am Fraunhofer IWU, 2010, Chemnitz, Germany
  
  
• A. Kunz, CAx - Und dann? Arbeiten im Cyberspace - Virtual Reality, UGS User Meeting, 2006, Glattbrugg, Switzerland
  
  
• A. Kunz, Freehand Force Feedback Devices (FFDs), CO-ME Workshop, 2002, Interlaken, Switzerland, [PDF]
  
  
• A. Kunz, Product Development in Co-operation between University and Industrial and Research Organisations, Workshop "Introduction of the Digital Product and its Benefit to Industry", 2001, Bucharest, Romania, [PDF]
  
  
• A. Kunz, Visualisierung und Brainstorming dig:ital - Kennenlernen der neuen Moderationsumgebung, Forschungsdialog an der ETH Zürich, 2001, Zurich, Switzerland
  
  

Patents

• A. Kunz, M. Zank, T. Nescher, Method and System to Track Human Locomotion by Relative Positional Tracking of Body Parts of the Human, ETH Zurich 2015, [BibTeX][Abstract], [PDF]
  
  
• A. Kunz, S. Müller, C. Spagno, Verfahren Vorrichtung und Gerät zur Erfassung von Bilddaten, ETH Zürich 2012, [BibTeX][Abstract], [PDF]
  
  
• R. Hofer, P. Kaplan, A. Kunz, System and a Method for Tracking Input Devices on LC-Displays, European Patent Application EP2107446 / ETH Zurich 2009, [BibTeX][Abstract], [PDF]
  
  
• A. Kunz, C. Spagno, Projection device for reproduction, detection of image data has projection body with arrangements for fully transmitting some incident light, making body opaque to further part of light, Eidgenoessische Technische Hochschule Zuerich 2002, [BibTeX][Abstract], [PDF]
  
  
• M. Gross, O. Staadt, M. Meier, A. Kunz, L. Van Gool, M. Engeli, Method for the production of a virtual reality environment prepares a concept data set with information on the properties of an object like a second user by processing the object's primary data with video images to give secondary data, Gruppe Graphische Datenverarbeitung 2001, [BibTeX][Abstract], [PDF]
  
  
• A. Kunz, S. Müller, C. Spagno, Acquisition and processing of image data for virtual reality display, multiplexes first and second user environments, in the second of which, user is actively illuminated, Zentrum fuer Produktentwicklung 2000, [BibTeX][Abstract]
  
  

Proposed theses

• Mathieu Lutfallah, Andreas Kunz, Semester project, Bachelor thesis, Master thesis, RDW in an unknown space, 2023 [Description]
  
  
• Mathieu Lutfallah, Andreas Kunz, Semester project, Bachelor thesis, Resets in Redirected Walking, 2023 [Description]
  
  
• Valentina Gorobets, Andreas Kunz, Master thesis, Impact of Limited Field of View on Human Behavior in Virtual Reality, 2023 [Description]
  
  
• Valentina Gorobets, Andreas Kunz, Semester project, Multimodal Feedback Designs and Knob Interactions for Control Panels, 2023 [Description]
  
  
• Mathieu Lutfallah, Andreas Kunz, Master thesis, Unified Redirection Library, 2023 [Description]
  
  
• Mathieu Lutfallah, Andreas Kunz, Semester project, Master thesis, Cascading Positional Data, 2023 [Description]
  
  
• Mathieu Lutfallah, Andreas Kunz, Semester project, Master thesis, Hybrid Tracking for Arena VR, 2023 [Description]
  
  
• Valentina Gorobets, Andreas Kunz, Studies on Mechatronics, Literature Review of Human Bahaviour in Virtual Reality, 2023 [Description]
  
  
• Valentina Gorobets, Andreas Kunz, Semester project, Perception differences of work processes between animated avatars and real persons, 2023 [Description]
  
  
• Valentina Gorobets, Andreas Kunz, Master thesis, Comparative analysis of human motions performance in reality, AR, and VR, 2023 [Description]
  
  
• Valentina Gorobets, Andreas Kunz, Semester project, Automatic Transcription Algorithm for Basic Human Movements in Real-Life Scenarios, 2022 [Description]
  
  

Started Theses

• Mathieu Lutfallah, Valentina Gorobets, Andreas Kunz, Bachelor thesis, Decision Making in VR, 2023 [Description]
  
  
• Andreas Kunz, Mathieu Lutfallah, Semester project, Remote Cross-platform Collaboration between AR and VR for an Industrial Task, 2023 [Description]
  
  
• Mathieu Lutfallah, Valentina Gorobets, Andreas Kunz, Semester project, Improving Mnemonic Techniques by Means of VR (Loci-VR), 2023 [Description]
  
  
• Joy Gisler, Valentina Gorobets, Andreas Kunz, Pollefeys Marc, Bachelor thesis, Automated Generation of Hand Poses for Virtual Reality, 2023 [Description]
  
  
• Christian Hirt, Andreas Kunz, Semester project, Software-in-the-Loop –Deploying a Machine Control System using Azure for Virtual Reality, 2023 [Description]
  
  
• Mathieu Lutfallah, Valentina Gorobets, Andreas Kunz, Bachelor thesis, Perception of Overlapping Architectures, 2023 [Description]
  
  
• Andreas Kunz, Bachelor thesis, Design and testing of a Lorentz force evaporation thruster, 2023 [Description]
  
  
• Mathieu Lutfallah, Andreas Kunz, Bachelor thesis, Redirected Walking in a FPS game, 2023 [Description]
  
  
• Andreas Kunz, Andreas Reichmuth, Semester project, Konstruktion und Validierung eines Stossdämpfers für einen elektrischen Kleinbagger, 2023 [Description]
  
  
• Valentina Gorobets, Andreas Kunz, Master thesis, Automatic translation of human actions performed in reality using Virtual Reality devices, 2022 [Description]
  
  

Concluded Theses

• Andreas Kunz, Kordian Caplazi, Fisher Yu, Master thesis, 3D reconstruction in a Mixed Reality Environment, 2023 [Description]
  
  
• Andreas Kunz, Kordian Caplazi, Master thesis, MR for Spatially Correct Information Mapping, 2023 [Description]
  
  
• Valentina Gorobets, Andreas Kunz, Semester project, Impact of limited field of view on human behavior in virtual reality, 2023 [Description]
  
  
• Joy Gisler, Mathieu Lutfallah, Andreas Kunz, Van Gool Luc, Semester project, Utilizing Head Orientation as an Alternative to Eye-Tracking in Virtual Reality, 2023 [Description]
  
  
• Joy Gisler, Andreas Kunz, Bachelor thesis, Effects of Attention Guidance on Virtual Reality Training, 2023 [Description]
  
  
• Andreas Kunz, Kordian Caplazi, Christian Holz, Master thesis, Automatic Generation of an Assembly Instruction for a Mixed Reality Environment, 2023 [Description]
  
  
• Andreas Kunz, Durmus Harman, Master thesis, Entwicklung und Implementierung eines Ansatzes zur Daten-getriebenen Root Cause Analyse für ein internationales Produktionsnetzwerk elektrischer Antriebe, 2022 [Description]
  
  
• Andreas Kunz, Peter Acél, Bachelor thesis, Applying Mixed Reality (MR) to Production Optimization Tasks, 2022 [Description]
  
  
• Andreas Kunz, Mathieu Lutfallah, Master thesis, Simulating RDW in an Unknown Space, 2022 [Description]
  
  
• Mathieu Lutfallah, Andreas Kunz, Bachelor thesis, Tracking Space Extension using SLAM, 2022 [Description]
  
  
• Andreas Kunz, Kordian Caplazi, Fisher Yu, Master thesis, Spatial Mapping in a Mixed Reality Environment, 2022 [Description]
  
  
• Andreas Kunz, Floris vandenOever, Semester project, AR Facilitated Vessel Navigation with HoloLens 2, 2022 [Description]
  
  
• Andreas Kunz, Joy Gisler, Valentin Holzwarth, Bachelor thesis, Touchscreen Interactions in Extended Reality, 2022 [Description]
  
  
• Joy Gisler, Andreas Kunz, Master thesis, Automated Generation of an Interactable Virtual Environment from CAD Assemblies, 2022 [Description]
  
  
• Valentin Holzwarth, Joy Gisler, Andreas Kunz, Master thesis, Implementing a Digital Twin of a Machine Tool Interactability and Versatility through Machine Control Integration, 2022 [Description]
  
  
• Joy Gisler, Andreas Kunz, Semester project, Virtual Validation of CAD Modeling-Based Assembly Pipeline Design, 2022 [Description]
  
  
• Valentina Gorobets, Andreas Kunz, Semester project, Development of an Automatic Transcription Algorithm for Basic Human Movements, 2022 [Description]
  
  
• Andreas Kunz, Ioannis Petousis, Alejandro Marzinotto, Master thesis, Deep Learning Instance Segmentation Enhanced with Synthetic Data for Firestop Cable Transit Systems Applications, 2022 [Description]
  
  
• Mathieu Lutfallah, Christian Hirt, Andreas Kunz, Caplazi Kordian, Semester project, Remote Cross-platform Collaboration between AR and VR, 2022 [Description]
  
  
• Mathieu Lutfallah, Andreas Kunz, Bachelor thesis, Comparing Standalone HMDs regarding Tracking Capabilities, 2021 [Description]
  
  
• Valentina Gorobets, Andreas Kunz, Bachelor thesis, Pointing, Pairing, and Grouping Gestures Recognition in Virtual Reality, 2021 [Description]
  
  
• Christian Hirt, Stefan Süßmaier, Andreas Kunz, Semester project, Language-Independent Instructions for Training in Virtual Reality, 2021 [Description]
  
  
• Christian Hirt, Joy Gisler, Andreas Kunz, Semester project, Infinite Virtual Labyrinth - An Adapting Maze for Spatial Awareness Tests, 2021 [Description]
  
  
• Valentina Gorobets, Christian Hirt, Andreas Kunz, Semester project, Redirected Walking in Overlapping Rooms, 2021 [Description]
  
  
• Valentina Gorobets, Andreas Kunz, Bachelor thesis, Evaluation of Grasping Gestures in a Virtual Environment, 2021 [Description]
  
  
• Christian Hirt, Andreas Kunz, Semester project, Human Path Prediction based on Real User Data using Machine Learning Approaches, 2021 [Description]
  
  
• Benno Käch, Christian Hirt, Andreas Kunz, Master thesis, Emotion Analysis in Images/Videos, 2021 [Description]
  
  
• Naina Dhingra, Andreas Kunz, Semester project, Pointing Gesture Recognition System, 2021 [Description]
  
  
• Andreas Kunz, Kordian Caplazi, David Shapira, Christian Holz, Bachelor thesis, Ghost Hand Simulation in MR, 2021 [Description]
  
  
• Benno Käch, Christian Hirt, Joy Gisler, Andreas Kunz, Semester project, Head Pose Estimation, 2021 [Description]
  
  
• Joy Gisler, Christian Hirt, Andreas Kunz, Semester project, Guiding User Attention in Virtual Environments, 2021 [Description]
  
  
• Naina Dhingra, Andreas Kunz, Semester project, Body Pose Estimation in Images / Videos, 2021 [Description]
  
  
• Christian Hirt, Andreas Kunz, Studies on Mechatronics, Redirected Walking – Exploring large Virtual Environments while freely walking, 2021 [Description]
  
  
• Joy Gisler, Andreas Kunz, Luong Tiffany, Holz Christian, Bachelor thesis, Frustrating! Evaluation of a Virtual Test on Frustration, 2021 [Description]
  
  
• Joy Gisler, Andreas Kunz, Luong Tiffany, Holz Christian, Bachelor thesis, Focus! Evaluation of a Virtual Test on Concentration, 2021 [Description]
  
  
• Naina Dhingra, Andreas Kunz, Semester project, Scene graph Generation, 2020 [Description]
  
  
• Christian Hirt, Andreas Kunz, Master thesis, Predictive Redirected Walking using Artificial Potential Fields in Virtual Reality, 2020 [Description]
  
  
• Christian Hirt, Andreas Kunz, Bachelor thesis, Extending Travelling Modalities with Haptic Feedback in Immersive Virtual Environments, 2020 [Description]
  
  
• Christian Hirt, Andreas Kunz, Studies on Mechatronics, Redirected Walking – Exploring large Virtual Environments while freely walking, 2020 [Description]
  
  
• Christian Hirt, Andreas Kunz, Bachelor thesis, Reset Occlusion Strategies for Multiuser Virtual Environments, 2020 [Description]
  
  
• Valentin Holzwarth, Christian Hirt, Andreas Kunz, Bachelor thesis, Collaborative Project Coordination in Immersive Virtual Environments, 2020 [Description]
  
  
• Christian Hirt, Andreas Kunz, Valentina Gorobets, Werner Züllig, Semester project, Virtual MTM - Analysis of a Packaging Working Place, 2020 [Description]
  
  
• Valentin Holzwarth, Andreas Kunz, Studies on Mechatronics, Experiencing Immersive Virtual Environments – How to Measure Users’ Perception?, 2020 [Description]
  
  
• Christian Hirt, Andreas Kunz, Semester project, Adaptive Short-term Path Prediction for Spontaneous Human Locomotion, 2020 [Description]
  
  
• Christian Hirt, Andreas Kunz, Semester project, Simulation Environment for Redirected Walking for Reactive and Predictive Approaches, 2020 [Description]
  
  
• Naina Dhingra, Andreas Kunz, Semester project, Deep Learning based Image/Video Segmentation, 2020 [Description]
  
  
• Naina Dhingra, Andreas Kunz, Semester project, Modular Network for Referring Expression Comprehension in Videos, 2020 [Description]
  
  
• Christian Hirt, Andreas Kunz, Studies on Mechatronics, Capturing the Variety of Different Forms of Real-life Movement using Redirected Walking, 2020 [Description]
  
  
• Christian Hirt, Andreas Kunz, Semester project, Reactive Redirected Walking using Artificial Potential Fields in Virtual Reality, 2020 [Description]
  
  
• Valentin Holzwarth, Christian Hirt, Andreas Kunz, Kroenert Nils, Master thesis, Virtual Learning Environments in Industrial Applications (HILTI), 2020 [Description]
  
  
• Christian Hirt, Martina Spahni, Andreas Kunz, Bachelor thesis, Learning Behaviour in Virtual Reality, 2019 [Description]
  
  
• Naina Dhingra, Andreas Kunz, Studies on Mechatronics, Segmentation of objects in Images/Videos, 2019 [Description]
  
  
• Naina Dhingra, Andreas Kunz, Bachelor thesis, Skeleton Tracking using a 360° Camera in Office Environments, 2019 [Description]
  
  
• Naina Dhingra, Christian Hirt, Andreas Kunz, Bachelor thesis, Non-verbal Communication in Meetings using Eye Tracking, 2019 [Description]
  
  
• Christian Hirt, Andreas Kunz, Bachelor thesis, Locomotion Behaviour in Virtual Reality, 2019 [Description]
  
  
• Christian Hirt, Andreas Kunz, Studies on Mechatronics, Redirected Walking – Exploring large Virtual Environments while freely walking, 2019 [Description]
  
  
• Valentin Holzwarth, Christian Hirt, Andreas Kunz, Nils Kroenert, Semester project, Virtual training environment for the prefabrication of installation systems, 2019 [Description]
  
  
• Christian Hirt, Andreas Kunz, Bachelor thesis, Potential Fields for Dynamic Objects in an HTC Vive Tracking Space, 2019 [Description]
  
  
• Christian Hirt, Andreas Kunz, Bachelor thesis, Where are you going? - Short-term Path Prediction for Spontaneous Human Locomotion, 2019 [Description]
  
  
• Christian Hirt, Andreas Kunz, Bachelor thesis, Stress Generation and Measurement in Virtual Environments, 2019 [Description]
  
  
• Valentin Holzwarth, Andreas Kunz, Nils Krönert, Bachelor thesis, Mixed reality on construction sites: A study on productivity improvements and user acceptability, 2019 [Description]
  
  
• Anh Ngoc Nguyen Thi, Andreas Kunz, Bachelor thesis, Human Following Behavior In Virtual Reality, 2019 [Description]
  
  
• Christian Hirt, Andreas Kunz, Studies on Mechatronics, Redirected Walking – Exploring large Virtual Environments while freely walking, 2019 [Description]
  
  
• Valentin Holzwarth, Andreas Kunz, Master thesis, Digital twins in manufacturing and in the construction sector: Features, similarities, applications, 2019 [Description]
  
  
• Christian Hirt, Andreas Kunz, Studies on Mechatronics, Potential Fields for Path Planning in Redirected Walking, 2018 [Description]
  
  
• Christian Hirt, Andreas Kunz, Studies on Mechatronics, Redirected Walking in Virtual Reality, 2018 [Description]
  
  
• Christian Hirt, Andreas Kunz, Studies on Mechatronics, Redirected Walking – Exploring large Virtual Environments while freely walking, 2018 [Description]
  
  
• Anh Ngoc Nguyen Thi, Andreas Kunz, Robert Riener, Master thesis, Evaluation of discrete gain application during eye blinking, 2018 [Description]
  
  
• Philip Roh, Andreas Kunz, Semester project, Der digitale Schatten in der Prodution - Evaluation der notwendigen Datenstrukturen, 2018 [Description]
  
  
• Markus Zank, Andreas Kunz, Master thesis, Remote User Representation in Virtual Reality, 2017 [Description]
  
  
• Philip Roh, Andreas Kunz, Simon Schmid, Master thesis, Modellierung und Simulation automatisierter flexibler Fertigungszellen zur Darstellung des Einflusses auf die Auslegung und Auslastung der Produktion, 2017 [Description]
  
  
• Philip Roh, Andreas Kunz, Pusch Fabian, Master thesis, Der digitale Schatten des Werkzeugs: Methoden und Umsetzung für die Geberit Produktions AG, 2016 [Description]
  
  
• Philip Roh, Andreas Kunz, Master thesis, Businessmodelle: «Daten sind das Öl der Zukunft» - Wertschöpfung durch Informationen der Produktion., 2016 [Description]
  
  
• Markus Zank, Andreas Kunz, Semester project, Multiphase Safety System for Real Walking in Virtual Environments, 2016 [Description]
  
  
• Markus Zank, Anh Ngoc Nguyen Thi, Andreas Kunz, Master thesis, Integration of SLAM Tracking into Redirected Walking, 2016 [Description]
  
  
• Anh Ngoc Nguyen Thi, Andreas Kunz, Bachelor thesis, Evaluating the validity of visual dependence measurements in Virtual Reality, 2016 [Description]
  
  
• Anh Ngoc Nguyen Thi, Markus Zank, Andreas Kunz, Semester project, Gain Compensation for Natural Walking, 2016 [Description]
  
  
• Markus Zank, Ali Alavi, Andreas Kunz, Bachelor thesis, Collaboration in Virtual Environments, 2016 [Description]
  
  
• Anh Ngoc Nguyen Thi, Thomas Nescher, Andreas Kunz, Bachelor thesis, Scanning of Real Scenes and Objects for Generating 'Walkable' Virtual Environments, 2016 [Description]
  
  
• Lennart Sören Bochmann, Andreas Kunz, Konrad Wegener, Master thesis, Entwicklung einer Methodik zur Auslegung des Fertigungslayouts eines flexiblen und dezentral gesteuerten Fertigungssystems, 2016 [Description]
  
  
• Ali Alavi, Andreas Kunz, Bachelor thesis, Kinect Sensor Interference Measurement, 2016 [Description]
  
  
• Markus Zank, Andreas Kunz, Semester project, Collision Feedback for Real Walking in Virtual Reality, 2016 [Description]
  
  
• Ali Alavi, Andreas Kunz, Bachelor thesis, Virtual Reality System for Improved Hand-Eye Coordination, 2015 [Description]
  
  
• Markus Zank, Andreas Kunz, Master thesis, Design and Requirement Analysis of a Factory Design Tool, 2015 [Description]
  
  
• Thomas Nescher, Markus Zank, Andreas Kunz, Semester project, Safety and Collision Prevention for Real Walking in Virtual Environments, 2015 [Description]
  
  
• Ali Alavi, Andreas Kunz, Master thesis, Incremental Open Set User Identification for Smart Environments, 2015 [Description]
  
  
• Markus Zank, Andreas Kunz, Semester project, Distance Perception in Real and Virtual Environments, 2015 [Description]
  
  
• Markus Zank, Andreas Kunz, Bachelor thesis, Performance evaluation of a novel relative/absolute hybrid tracking system, 2015 [Description]
  
  
• Markus Zank, Andreas Kunz, Bachelor thesis, Velocity Gains for Real Walking In Virtual Environments, 2015 [Description]
  
  
• Ramon Hofer, Andreas Kunz, Ralf Kästner, Bachelor thesis, Performance Measurements on the Oculus HMD with See-through Option, 2014 [Description]
  
  
• Markus Zank, Andreas Kunz, Semester project, Design and Implementation of a Factory Design Tool for Desktop and Tabletop Interaction, 2014 [Description]
  
  
• Markus Zank, Andreas Kunz, Bachelor thesis, Construction of a Portable Virtual Reality System, 2014 [Description]
  
  
• Ralf Kästner, Andreas Kunz, Semester project, Dynamic Modeling and Gait Control of a Walking Hexapod, 2014 [Description]
  
  
• Markus Zank, Andreas Kunz, Bachelor thesis, Examination of Redirection Thresholds, 2014 [Description]
  
  
• Ali Alavi, Andreas Kunz, Bachelor thesis, LEAP-based Braille Keyboard, 2014 [Description]
  
  
• Bastian Migge, Andreas Kunz, Konrad Wegener, Tolga Kurtoglu Dr., Master thesis, Automated continual and resource-aware stock-to-goal manufacturing planning and scheduling, 2013 [Description]
  
  
• Konrad Wegener, Andreas Kunz, Roland Schoetzau, Master thesis, Real Time Path Correction of a KUKA Robot with Optical Feedback from a Leica Laser Tracker, 2013 [Description]
  
  
• Ali Alavi, Andreas Kunz, Master thesis, Design and evaluation of gesture tracking systems for use during collaborative meetings on Microsoft PixelSense interactive table, 2013 [Description]
  
  
• Konrad Wegener, Andreas Kunz, Georg Heinecke, Bachelor thesis, Konzept für die funktionale und visuelle Systemerweiterung auf Basis von Plan- und Objektverfolgungsdaten, 2013 [Description]
  
  
• Thomas Nescher, Andreas Kunz, Master thesis, Short Term Path Prediction of Human Locomotion by Analyzing Preparatory Body Movements, 2013 [Description]
  
  
• Ali Alavi, Andreas Kunz, Bachelor thesis, Pen for PixelSense - Software, 2013 [Description]
  
  
• Ali Alavi, Andreas Kunz, Bachelor thesis, Pen for PixelSense - Hardware, 2013 [Description]
  
  
• Bastian Migge, Andreas Kunz, Semester project, Dynamic Rewards in Reinforcement Learning of Markov Processes, 2013 [Description]
  
  
• Konrad Wegener, Daniel Politze, Andreas Kunz, Andres Leupp, Christian Loss, Master thesis, Prozessoptimierung in der industriellen Fertigung, 2013 [Description]
  
  
• Andreas Kunz, Konrad Wegener, Master thesis, Analyse und Modellierung Produktionsprozess EVTEC AG, 2013 [Description]
  
  
• Zoltán Sárosi, Andreas Kunz, Bachelor thesis, Improving MS Kinect’s 3D resolution by controlled relative movement of the sensor and the object, 2013 [Description]
  
  
• Bastian Migge, Andreas Kunz, Semester project, Learning MDP controller evaluation for strategic incineration plant production planning, 2012 [Description]
  
  
• Bastian Migge, Andreas Kunz, Yeongmi Kim, (RELAB), Master thesis, Development of a VR game application using Kinect to train arm function in stroke rehabilitation, 2012 [Description]
  
  
• Andreas Kunz, Konrad Wegener, Georg Heinecke, Bastian Migge, Bachelor thesis, Der Einfluss stochastischer Prozesse auf die Auswirkungen von Störungen in Produktionssystemen, 2012 [Description]
  
  
• Andreas Kunz, Gabor Kovacs, Bachelor thesis, Silicone deposition for electroactive polymer actuators fabrication, 2012 [Description]
  
  
• Andreas Kunz, Bastian Migge, Semester project, POMDP Model Extraction From Measurement Data, 2012 [Description]
  
  
• Andreas Kunz, Konrad Wegener, Semester project, Vergleich verschiedener Beschichtungsverfahren für die Herstellung dielektrischer Elastomere, 2012 [Description]
  
  
• Andreas Kunz, Schaumburg Tina, Bachelor thesis, Generic Crane Concept, 2012 [Description]
  
  
• Andreas Kunz, Markus Bruderer, Andreas Pötzsch, Bachelor thesis, Bewertungsprozess einer beabsichtigten Änderung des Prozessdesigns bei der Zur Rose AG, 2012 [Description]
  
  
• Andreas Kunz, Rudy Huang, Marino Menozzi, Bachelor thesis, Development of Illumination System with Dynamic Masking Function for Real-Time Scenario-Simulation Application, 2012 [Description]
  
  
• Andreas Kunz, Schaumburg Tina, Bachelor thesis, Multi Product Factory Model, 2012 [Description]
  
  
• Thomas Nescher, Andreas Kunz, Semester project, Design und Setup eines Virtual Reality Systems, 2012 [Description]
  
  
• Thomas Nescher, Andreas Kunz, Semester project, Acoustic Step Feedback System for Walking in Virtual Environments, 2012 [Description]
  
  
• Andreas Kunz, Bastian Migge, Bachelor thesis, User Location Awareness on Large Interactive Screens, 2012 [Description]
  
  
• Bastian Migge, Andreas Kunz, Bachelor thesis, POMDP controller for strategic incineration plant production planning, 2012 [Description]
  
  
• Andreas Kunz, Konrad Wegener, Georg Heinecke, Bastian Migge, Bachelor thesis, Bestimmung des Nettoeffekts von Störereignissen in Produktionssystemen und deren Kritikalität, 2011 [Description]
  
  
• Andreas Kunz, Thomas Heinz-Schwarzmaier, Master thesis, Improvement of the Generation and Maintainability of Turbine Blade Models in Catia V5 with Respect to the Overall Engineering Process, 2011 [Description]
  
  
• Bastian Migge, Andreas Kunz, Bachelor thesis, 3D Tracking Based Parallax Correction, 2011 [Description]
  
  
• Bastian Migge, Andreas Kunz, Bachelor thesis, Click Accuracy for Targets on Large Interactive Screen, 2011 [Description]
  
  
• Thomas Nescher, Bastian Migge, Andreas Kunz, Master thesis, Analyse und Vergleich von Tracking Systemen für Kopf-Tracking in Virtuellen Umgebungen, 2011 [Description]
  
  
• Thomas Nescher, Bastian Migge, Andreas Kunz, Semester project, Z-Camera based Video Overlay for People on Content, 2011 [Description]
  
  
• Noëlle Jufer, Andreas Kunz, Adrian Steinemann, Philipp Ackermann, Philippe Burkhalter, Bachelor thesis, Layout Tool zur frühen Fabrikplanung, 2011 [Description]
  
  
• Adrian Steinemann, Andreas Kunz, Semester project, SAMSON: Modellierung und Interaktionskonzept einer virtuellen 3D-Umgebung des Centrals, 2011 [Description]
  
  
• Adrian Steinemann, Andreas Kunz, Ramon Hofer, Marko Dahl, Master thesis, Konzeptstudie zur Entwicklung eines Rennfahrsimulators im low-cost Sektor, 2010 [Description]
  
  
• Ramon Hofer, Andreas Kunz, Bachelor thesis, 40“ Multiuser-Demonstrator Aufbau (MightyTrace V2), 2010 [Description]
  
  
• Daniel Politze, Noëlle Jufer, Andreas Kunz, Bachelor thesis, Cross-domain analysis/modeling of performance indicators for monitoring the factory of the future, 2010 [Description]
  
  
• Andreas Kunz, Carmen Kobe, Mathias Holzinger, Fritz Schäfer, Sem Hediger, Semester project, Entwicklung eines Gerätes zur Gletscherspaltenbergung, 2010 [Description]
  
  
• Ramon Hofer, Andreas Kunz, Bachelor thesis, Integration 40“ Multiuser-Demonstrator (MightyTrace V2), 2010 [Description]
  
  
• Morten Fjeld, Ramon Hofer, Andreas Kunz, Master thesis, User Study for Evaluation of a new Highspeed Tabletop Interaction System, 2010 [Description]
  
  
• Ramon Hofer, Andreas Kunz, Bachelor thesis, Nutzung einer bestehenden Interaktionstechnologie auf anwendungsfremden Oberflächen, 2010 [Description]
  
  
• Bastian Migge, Andreas Kunz, Semester project, Low-budget 3D Tracking System based on Wii Controllers, 2010 [Description]
  
  
• Adrian Steinemann, Andreas Kunz, Semester project, User Study: Analyzing Net Based Working Methods, 2010 [Description]
  
  
• Adrian Steinemann, Andreas Kunz, Semester project, SAMSON: Simulation Supported 3D Traffic Environment, 2010 [Description]
  
  
• Andreas Kunz, Daniel Thalmann,, F. Vexo,, M. Hopmann,, P. Salamini,, Master thesis, Remotely-accessed and Virtual Library, 2010 [Description]
  
  
• Adrian Steinemann, Andreas Kunz, Semester project, Com-how: Gewusst wie kommunizieren, 2010 [Description]
  
  
• Anders Jönsson, Jens Bathelt, Andreas Kunz, Bachelor thesis, Innovation of a sensor concept, 2009 [Description]
  
  
• Andreas Kunz, Semester project, Konzeption und Validierung eines Produktionsprozesses zur Herstellung laminierter Klettergurte, 2009 [Description]
  
  
• Andreas Kunz, Master thesis, Qualifizierung und Reinigungsvalidierung der neuen Bucher Horizontal-Presse HPX 3007 durch FMEA für eine Maschinen-Neuinstallation, 2009 [Description]
  
  
• Ramon Hofer, Andreas Kunz, Bachelor thesis, Implementierung der Übermittlung von Interaktionsdaten, 2009 [Description]
  
  
• Ramon Hofer, Andreas Kunz, Bachelor thesis, Implementierung des TUIO Protokolls zur Übertragung von Interaktionsdaten, 2009 [Description]
  
  
• Ramon Hofer, Andreas Kunz, Master thesis, Verbesserung der Interaktionsgeräte für eine neuartige Interaktionstechnologie, 2009 [Description]
  
  
• Morten Fjeld, Andreas Kunz, Master thesis, Mixed Presence Groupware - Requirements and Taxonomy for Collaboration and Sketching, 2009 [Description]
  
  
• Andreas Kunz, Semester project, Computergestützte Zahnimplantologie, 2009 [Description]
  
  
• Ramon Hofer, Andreas Kunz, Semester project, Skalierungskonzept für ein Multiuser Interaktionssystem (MightyTrace), 2009 [Description]
  
  
• Ramon Hofer, Thomas Kennel, Andreas Kunz, Master thesis, Aufbau CRION-Tisch II, 2008 [Description]
  
  
• Adrian Steinemann, Andreas Kunz, Ramon Hofer, Josef Albert Meile, Bachelor thesis, Virtual-Reality supported Simultaneous Engineering in Collaborative Environments, 2008 [Description]
  
  
• Ramon Hofer, Andreas Kunz, Bachelor thesis, Touch-Erweiterung einer Mehrbenutzer Tracking Technologie, 2008 [Description]
  
  
• Martin Küchler, Andreas Kunz, Semester project, CollaBoard: Minimierung des Offsets zwischen Bildebene und Interaktionsebene, 2008 [Description]
  
  
• Georges Fadel, Andreas Kunz, Master thesis, Design and manufacture an elevator for a tissue printer, 2008 [Description]
  
  
• Thomas Kennel, Andreas Kunz, Master thesis, Einfluss des Parallaxenversatzes auf die Bedienungsfreundlichkeit interaktiver Grossdisplays, 2008 [Description]
  
  
• Andreas Kunz, Bernd Laue, Bachelor thesis, Technische Realisierung und wirtschaftliche Umsetzung von Adaptionen im Produktentwicklungsprozess am Beispiel des Heckspoiler Sonderzubehör des BMW E92/E93, 2007 [Description]
  
  
• Ramon Hofer, Andreas Kunz, Master thesis, Erweiterung der Interaktionstechnologie in einer Kollaborationsumgebung, 2007 [Description]
  
  
• Thomas Kennel, Andreas Kunz, Bachelor thesis, Erstellen von Anwendungsszenarien für eine netzbasierte Kollaboration, 2007 [Description]
  
  
• Adrian Steinemann, Andreas Kunz, Georges Fadel, Joachim Taiber, Master thesis, Computer-supported Creativity Processes in Research and Development, 2007 [Description]
  
  
• Ramon Hofer, Andreas Kunz, Bachelor thesis, TTT - TFT-Display Tracking Technology, 2007 [Description]
  
  
• Andreas Kunz, Ramon Hofer, Semester project, Evaluation und Auswahl von Scenegraphs zur Unterstützung kollaborativer Umgebungen, 2007 [Description]
  
  
• Andreas Kunz, Adrian Steinemann, Frank Konsorski, Joachim Taiber, Master thesis, Optimizing Collaboration with Respect to Team and Project Phases, 2007 [Description]
  
  
• Andreas Kunz, Philipp Ackermann, Semester project, Kosten- und Preiskalkulation im Maschinenbau mit Hilfe des Tools der Firma P'X Perspectix, 2007 [Description]
  
  
• Andreas Kunz, Konsorski Frank, Semester project, Requirement Analysis of Global Collaboration, 2006 [Description]
  
  
• Andreas Kunz, Rui Zhang, Semester project, Implementation of a Controlling Interface for a Force Feedback Glove, 2006 [Description]
  
  
• Rui Zhang, Andreas Kunz, Semester project, Entwicklung eines Computerinterfaces zur Ansteuerung eines Kraftrückkopplungs-Handschuhs, 2006 [Description]
  
  
• Thomas Kennel, Andreas Kunz, Semester project, how do you do? - Industrielle Nutzung von Methoden und Technologien für Kommunikation und Kollaboration., 2006 [Description]
  
  
• Rui Zhang, Andreas Kunz, Semester project, Schnittstellendesign eines Kraftrückkopplungsgerätes basierend auf dielektrischen Elastomer-Aktoren, 2005 [Description]
  
  
• Morten Fjeld, Andreas Kunz, Semester project, Auswertung einer Brauchbarkeitsuntersuchung von alternativen Tools für Tangible Interaction, 2005 [Description]
  
  
• Georges Fadel, Andreas Kunz, Master thesis, Optimal Slicing for Ultrasonic Consolidation, 2005 [Description]
  
  
• Martin Küchler, Andreas Kunz, Semester project, Interaktion im Virtual Conference Space, 2005 [Description]
  
  
• Georges Fadel, Martin Küchler, Andreas Kunz, Semester project, Application Oriented Collaboration, 2005 [Description]
  
  
• Rui Zhang, Andreas Kunz, Semester project, Elektrische Sicherheitsanforderungen für dielektrische Elastomer-Aktoren in einem Kraftrückkopplungs-Handschuh, 2005 [Description]
  
  
• Christoph Ganser Schwab, Andreas Kunz, Anders Jönsson, Master thesis, Development of TUI with New Functional Capabilities, 2005 [Description]
  
  
• Andreas Kunz, Thomas Kennel, Anders Jönsson, Master thesis, Implementing the VireaLab and Generation of a Collaboration Scenario, 2005 [Description]
  
  
• Martin Küchler, Andreas Kunz, Anders Jönsson, Master thesis, Projection Blanking for Quasi-simultaneous Image Acquisition and Image Display in Mixed Reality Environments, 2005 [Description]
  
  
• Andreas Kunz, Martin Küchler, Semester project, Programmierung einer Synchronisationselektronik, 2005 [Description]
  
  
• Martin Küchler, Andreas Kunz, Master thesis, Aufbau und Test einer kollaborativen Umgebung, 2005 [Description]
  
  
• Thomas Kennel, Andreas Kunz, Martin Küchler, Master thesis, Projektoroentiertes Zusammenarbeiten heute und morgen, 2005 [Description]
  
  
• Thomas Kennel, Andreas Kunz, Christoph Ganser Schwab, Semester project, Entwicklung eines Gruppenarbeitsplatzes mit optisch getrackten aktiven Interaktionstools, 2004 [Description]
  
  
• Andreas Kunz, Thomas Kennel, Christoph Ganser Schwab, Semester project, Entwicklung eines optisch getrackten Multiuser-Interaktionstools, 2004 [Description]
  
  
• Andreas Kunz, Thomas Kennel, Christoph Ganser Schwab, Martin Küchler, Semester project, Konzeption und Installation einer mehrkanaligen VC Umgebung, 2004 [Description]
  
  
• Andreas Kunz, Thomas Kennel, Alois Breiing, Semester project, Creatable: Design eines Kreativitäts- und Kommunikations-Arbeitsplatzes, 2004 [Description]
  
  
• Thomas Kennel, Andreas Kunz, Master thesis, Design und Implementierung einer Kreativitäts-Software X35 für Tablet-PC, 2004 [Description]
  
  
• Martin Küchler, Andreas Kunz, Semester project, Physische Begehung grosser virtueller Welten, 2004 [Description]
  
  
• Andreas Kunz, Armin Della-Rossa, Master thesis, Kapazitätsplanung Prototypen- und Versuchswerkstatt bei ABB Turbo Systems AG, 2004 [Description]
  
  
• Rui Zhang, Andreas Kunz, Andrea Mazzone, Master thesis, Dielectric Elastomer Actuators for Force Feedback Gloves, 2003 [Description]
  
  
• Martin Küchler, Andreas Kunz, Semester project, Freespace Walking, 2003 [Description]
  
  
• Georges Fadel, Andreas Kunz, Master thesis, Virtual LEGO for OpenGL Performer, 2003
  
  
• Thomas Kennel, Andreas Kunz, Alois Breiing, Semester project, Ideenfindungstechniken/Kreativitätstechniken im analogen und digitalen Umfeld, 2003 [Description]
  
  
• Andreas Kunz, Stephan Müller, Semester project, Optimierung und Industrieevaluation einer neuen FMEA-Software, 2003 [Description]
  
  
• Thomas Kennel, Andreas Kunz, Semester project, Untersuchung und Evaluation penbasierter Eingabegeräte, 2003 [Description]
  
  
• Andreas Kunz, Christian Spagno, Semester project, Aufbau eines low-cost blue-c Demonstrators, 2003 [Description]
  
  
• Andrea Mazzone, Andreas Kunz, Semester project, Entwicklung eines SMA Linear-Aktuators, 2003 [Description]
  
  
• Andreas Kunz, Markus Schichtel, Master thesis, Konzept virtueller Projekträume, 2003 [Description]
  
  
• Andreas Kunz, Thomas Kennel, Master thesis, Funktionale Erweiterung “SpeakersCorner”, 2003 [Description]
  
  
• Andrea Mazzone, Andreas Kunz, Semester project, Untersuchung elektroaktiver Polymere als adaptive Strukturen für Kraftrückkopplungsgeräte, 2003 [Description]
  
  
• Andreas Kunz, Federico Jourdan, Rossa Armin Della, Master thesis, Entwicklung eines Systems zur Berechnung von Turbolader-Montagezeiten bei ABB Turbo Systems AG, 2003 [Description]
  
  
• Andreas Kunz, Semester project, Untersuchung der UWB-Technologie, 2002 [Description]
  
  
• Christian Spagno, Andreas Kunz, Semester project, Entwicklung eines Shuter-Systems für LC-Projektoren, 2002 [Description]
  
  
• Christian Spagno, Andreas Kunz, Semester project, Projektions- und Displaytechnologien – Ein Marktüberblick, 2002 [Description]
  
  
• Andreas Kunz, Christian Spagno, Semester project, Einsatz- und Vermarktungspotential 'blue-c', 2002 [Description]
  
  
• Andreas Kunz, Stephan Müller, Semester project, Weiterentwicklung des digitalen Kleingruppenarbeitsplatzes, 2002 [Description]
  
  
• Andreas Kunz, Andrea Mazzone, Semester project, Entwicklung eines haptischen Interfaces für chirurgische Anwendungen - Anforderungen der Chirurgie, 2002 [Description]
  
  
• Andreas Kunz, Stephan Dierssen, Master thesis, Interaktive Visualisierung von Displayinhalten in VR, 2002 [Description]
  
  
• Andreas Kunz, Thomas Kennel, Semester project, SpeakersCorner, 2002 [Description]
  
  
• Andreas Kunz, Christian Spagno, Semester project, Entwicklung eines Shuttersystems für Projektoren in Virtual Reality Anwendungen, 2002 [Description]
  
  
• Christian Spagno, Andreas Kunz, Semester project, Graphische Benutzeroberfläche zum Programmieren eines u-Prozessors, 2002 [Description]
  
  
• Andreas Kunz, Stefan Dierssen, Master thesis, Einbindung der Virtuellen Realität in den Innovationsprozess von Unternehmen am Beispiel der Virtuellen Maschine, 2002 [Description]
  
  
• Andreas Kunz, Andrea Mazzone, Semester project, Entwicklung eines haptischen Interfaces für chirurgische Anwendungen, 2002 [Description]
  
  
• Andreas Kunz, Stephan Müller, Master thesis, Marketingkonzept SchweissbrennerXP, 2001 [Description]
  
  
• Andreas Kunz, Andrea Mazzone, Christian Spagno, Semester project, Weiterentwicklung eines Gruppenarbeitsplatzes, 2001 [Description]
  
  
• Andreas Kunz, Master thesis, Unterstützung für Zugänglichkeitskontrollen und Maintenance durch Hilfsmittel der virtuellen Realität, 2001 [Description]
  
  
• Thomas Kennel, Andreas Kunz, Semester project, Weiterentwicklung eines digitalen Rednerpultes, 2001 [Description]
  
  
• Andreas Kunz, Semester project, Auslegung und Konstruktion eines See-Through-Devices, 2001 [Description]
  
  
• Andrea Mazzone, Stephan Müller, Andreas Kunz, Semester project, Detektion und Positionsbestimmung von Objekten, 2001 [Description]
  
  
• Andreas Kunz, Andrea Mazzone, Semester project, Entwicklung eines haptischen Interfaces, 2001 [Description]
  
  
• Andreas Kunz, Christian Spagno, Semester project, Untersuchung neuartiger Projekitonswerkstoffe, 2001 [Description]
  
  
• Stephan Müller, Andreas Kunz, Semester project, Konzeption, Aufbau und Evaluation eines Rechnerclusters, 2001 [Description]
  
  
• Andreas Kunz, Markus Meier, Romeo Deplazes, Hannes Kocher, Jörg Evertz, Michael Krohn, Master thesis, Konzept und Visualisierung eines Multimobils für Aufzüge, 2001 [Description]
  
  
• Andreas Kunz, Stephan Müller, Semester project, Weiterentwicklung eines Kraftrückkopplungsgerätes, 2001 [Description]
  
  
• Andreas Kunz, S. Büchi, Semester project, Entwicklung eines Systems zur Positionsbestimmung und Identifikation von Objekten identischer Form (SPIOF), 2000 [Description]
  
  
• Andreas Kunz, Stephan Keller, Heiko Benz, Semester project, Nutzen der FMEA in der Produkte-Entwicklung, 2000 [Description]
  
  
• Andreas Kunz, Stephan Müller, Master thesis, Erstellung eines FMEA-Software-Prototypen mit integrierter Visualisierung und Datenbankankopplung, 2000
  
  
• Andreas Kunz, Semester project, Konstruktion eines virtuellen Messestandes, 2000 [Description]
  
  
• Andreas Kunz, Semester project, Funktionale Gestaltung eines haptischen Interfaces, 1999 [Description]
  
  
• Andreas Kunz, Semester project, LaserMouse, 1999 [Description]
  
  
• Andreas Kunz, Wilfried Elspass, Semester project, Funktional Gestaltung eines haptischen Interfaces, 1999 [Description]
  
  
• Andreas Kunz, Stephan Müller, Martin Bichsel, Semester project, LaserMouse, 1999 [Description]
  
  
• Andreas Kunz, Stefan Dierssen, Mark Wohlgensinger, Semester project, Evaluation und Konzeptionierung einer Software zur Modifikation von VRML-Daten, 1999 [Description]
  
  
• Andreas Kunz, Master thesis, Nutzenanalyse des Einsatzes der Virtual Reality Technologie in der Failure Mode and Effect Analysis, 1999 [Description]
  
  
• Andreas Kunz, Semester project, Entwicklung eines aktiven Greifers mit SMA-Antrieb, 1998 [Description]
  
  
• Andreas Kunz, Semester project, Virtual Reality, 1998 [Description]
  
  
• Andreas Kunz, Semester project, Integration einer Elektronik zur Energierückgewinnung in Laminataufbauten, 1996 [Description]
  
  
• Andreas Kunz, Semester project, Konstruktion eines Piezogenerators, 1996 [Description]